Digital pH monitor

[Ken]

I've decided to set up an automatic CO2 system for my 20 gal tank.
I've decided to go with an inexpensive "student" electrode as it has
high durability and sufficient accuracy for the task. Unfortunately
the only pH monitors that I have found are the 2 that dupla sells. Is
this it? Or am I going to have to spend $500 for a scientific grade
meter (which I won't).

Ken

[Paulio629]

There are a few around.
Pinpoint
Hanna
Milwaukee
These guys sell Hanna and Milwaukee
http://www.automatedaquariums.com
www.drsfostersmith.com sells pinpoint.


Unfortunately
>the only pH monitors that I have found are the 2 that dupla sells. Is
>this it? Or am I going to have to spend $500 for a scientific grade
>meter (which I won't).
>
>Ken

[Dave Millman]

Ken wrote:

> I've decided to set up an automatic CO2 system for my 20 gal tank.
> I've decided to go with an inexpensive "student" electrode as it has
> high durability and sufficient accuracy for the task. Unfortunately
> the only pH monitors that I have found are the 2 that dupla sells. Is
> this it? Or am I going to have to spend $500 for a scientific grade
> meter (which I won't).

Not to cause trouble, but what is your reason for building a CO2 control
system? Leaving the CO2 on 24 hours per day works fine, and lots of people
turn the CO2 on and off with their lights.

Do you have a specific application that requires pinpoint pH control, such
that you are willing to undertake the ongoing probe calibration and
maintenance, and risk pH crash due to probe/system failure?

[Ken]

Dave Millman > wrote in message >...
> Ken wrote:
>
> > I've decided to set up an automatic CO2 system for my 20 gal tank.
> > I've decided to go with an inexpensive "student" electrode as it has
> > high durability and sufficient accuracy for the task. Unfortunately
> > the only pH monitors that I have found are the 2 that dupla sells. Is
> > this it? Or am I going to have to spend $500 for a scientific grade
> > meter (which I won't).
>
> Not to cause trouble, but what is your reason for building a CO2 control
> system? Leaving the CO2 on 24 hours per day works fine, and lots of people
> turn the CO2 on and off with their lights.
>
> Do you have a specific application that requires pinpoint pH control, such
> that you are willing to undertake the ongoing probe calibration and
> maintenance, and risk pH crash due to probe/system failure?

No trouble, it's just that I have experience with dealing w/ pH meters
as I use them everyday at work, so the calibration/maintenance issue
isn't that big a deal. Plus, gel filled electrodes are pretty much
maintenence free, which is why I'm getting one rather than use
whatever comes with the meter. Mostly, I just like the idea of having
my pH (and therefore my CO2 levels) monitored and regulated 24/7.

[Steve]

Hi.. Where did you get the gell-filled PH probe? Will it work with my
PinPoint Ph Monitor?? it has a BNC connector to it..

Steve


"Ken" > wrote in message
om...
> Dave Millman > wrote in message
>...
> > Ken wrote:
> >
> > > I've decided to set up an automatic CO2 system for my 20 gal tank.
> > > I've decided to go with an inexpensive "student" electrode as it has
> > > high durability and sufficient accuracy for the task. Unfortunately
> > > the only pH monitors that I have found are the 2 that dupla sells. Is
> > > this it? Or am I going to have to spend $500 for a scientific grade
> > > meter (which I won't).
> >
> > Not to cause trouble, but what is your reason for building a CO2 control
> > system? Leaving the CO2 on 24 hours per day works fine, and lots of
people
> > turn the CO2 on and off with their lights.
> >
> > Do you have a specific application that requires pinpoint pH control,
such
> > that you are willing to undertake the ongoing probe calibration and
> > maintenance, and risk pH crash due to probe/system failure?
>
> No trouble, it's just that I have experience with dealing w/ pH meters
> as I use them everyday at work, so the calibration/maintenance issue
> isn't that big a deal. Plus, gel filled electrodes are pretty much
> maintenence free, which is why I'm getting one rather than use
> whatever comes with the meter. Mostly, I just like the idea of having
> my pH (and therefore my CO2 levels) monitored and regulated 24/7.

[Ken]

"Steve" > wrote in message >...
> Hi.. Where did you get the gell-filled PH probe? Will it work with my
> PinPoint Ph Monitor?? it has a BNC connector to it..
>

There are two places you can look (I haven't bought anything yet).
VWR www.vwr.com and Fisher Scientific www.fishersci.com

I'd go with VWR first as they have a better website, but check out
Fisher too. You also might try calling tech support and asking what
they have that meets your requirements (continuous monitoring, low
maintanance, etc) as they can be very helpful, but probably don't have
much aquarium knowledge. Most of the electrodes should come available
with BNC connectors. Of course, if you're willing to spend about
$500, you can get a CO2 sensing electrode from either of them.

What sort of electrode does PinPoint send with their monitor? Nobody
seems to give too much info on the website.

[Aquatic-store.com]

What kind are you looking for? Email me.

Marc

http://www.Aquatic-store.com






On 8 Mar 2003 11:33:43 -0800, (Ken) wrote:

>I've decided to set up an automatic CO2 system for my 20 gal tank.
>I've decided to go with an inexpensive "student" electrode as it has
>high durability and sufficient accuracy for the task. Unfortunately
>the only pH monitors that I have found are the 2 that dupla sells. Is
>this it? Or am I going to have to spend $500 for a scientific grade
>meter (which I won't).
>
>Ken