"JazzyB!" jazzybjazzy DONTWANTANY @hotmail.com wrote in message
...
Here's the skinny:
I setup my Eheim Ecco 2231 canister filter last night and it was running
quite well. As a pre-caution I put the filter in a bucket... just in
case.
Well... I awoke this morning to discover the "just in case". The bucket
had
over a litre of water in it.
It doesn't appear that the water dripped from the tubing or where the
tubing
is connected to the joints, though it could've happened. I've stopped the
filter and pulled it apart just to inspect (the DIY in me) and see if
everything seemed kosher. Everything seemed okay so I'm about to empty
the
bucket and run the filter again... in the bucket .
Does anyone have any ideas as to what could've caused this water to appear
in the bucket? Does anyone here own an Ecco?
This filter needs to be up and running ASAP so I'd greatly appreciate your
prompt responses.
As with any cannister if you don't get the seal quite right on the lid the
thing can/will leak. Chances are that by pulling it apart & putting it back
together you've solved the problem. Only other thing is that if it is a
brand new filter, did you grease the seal?
I.