View Single Post
  #5   Report Post  
Old 14-03-2003, 01:57 AM
Buzzard Face
 
Posts: n/a
Default Drs Foster Smith CO2 needle valve

Nikolay wrote:

I find the Marine Monsters standart valve to be the best from the one
I've used myself. Marine Monsters may have not so good of a customer
service, but their merchandise is great.

--Nikolay


In defense of Marine Monster (www.marine-monsters.com), My experience with
them from a customer service perspective has been good. Any problems or
issues they correct. The products they sell are good!

Buzz



"Bob Alston" wrote in message
...
If you look at the yellow block of text in the web site, you can see that
there is a 6.5 turns version available. Wonder if that is the same one as
Fish Vet??

Somewhere, another online fish store, I saw what appears to be the same
valve but said 4 turns of revolution.

Bob

--
Bob Alston
918.494.4913

"nikolay_kraltchev" wrote in message
m...
No! The Specialty Manufacturing Standart valve looks like the one
DrsFosterSmith sells, but it is NOT the same thing.

The Specialty Manufacturing Standart valve needs only 2-1/2 turns to
go from fully open to fully closed position. It works, but it's not
precise at all. You are better off with the $5 Home Depot brass
needle valve.

The Specialty Manufacturing Mini Needle Valve is a bit better - about
5 turns, but still not very precise. Works fine though.

Specialty Manufacturing has a minimum order of $50.
But I think their standart and their mini check valves are a great
deal - cheap, metalic, no rubber to deteriorate. Compare to a
$30-something Dennerle plastic check valve from Marine Monsters or a
$.99 plastic/rubber one from your LFS.

The Fishvet.com guy sells a needle valve that looks like the Specialty
Manufacturing Standart valve, but has like 6-1/2 turns. That one is
good enough. The Fishvet guy does not take merchandise back as I
hear.

I find the Marine Monsters standart valve to be the best from the one
I've used myself. Marine Monsters may have not so good of a customer
service, but their merchandise is great.

--Nikolay



"Bob Alston" wrote in message

.. .
Do you think this Drs F & Smith needle valve



http://www.drsfostersmith.com/produc...=6&pCatId=4598

is the same valve as the top one shown here

http://www.specialtymfg.com/needle.htm

with the options of 1/8 " barbs for input and output?

Bob


"Bob Alston" wrote in message
.. .
Anyone know the manufacturer of the needle valve Drs. F & S sell?

How
does
it compare to the Clippard sold by others?

Bob