Thread: bent crankshaft
View Single Post
  #2   Report Post  
Old 15-03-2003, 12:56 AM
Dr. Doctor
 
Posts: n/a
Default bent crankshaft

it will be a big job, you will need special tools,( torque wrenches a must)
being this is a overhead camshaft unit unless you have some experience in
doing this type of work and the proper service info I would not recommend
it. Just to split the oil pan off the block is tricky from the way it is
made and sealed. If you are not careful you may damage either part and could
price the repair over the cost of a new unit. Take it to the pros if they
screw it up in fixing it that will be there cost not yours.