View Single Post
  #3   Report Post  
Old 02-06-2006, 01:58 AM posted to rec.aquaria.freshwater.plants,rec.aquaria.freshwater
Koi-Lo
 
Posts: n/a
Default Black Brush and green algae problems - wire algae

*Note: There are two "Koi-Lo's" on the pond and aquaria groups.

"Mark Baldwin" wrote in message
...
The best way to avoid algae is to make sure your plants have everything
they need to grow, then they will simple outcompete the algae for
nutrients.


I'm using Excel and Flourish micronutrients plus extra Potash and still have
an algae problem. :-( The black sooty algae has been replaced by a black
wiry, very ugly algae now. Neither the goldfish, the otos nor the 2 plecos
will eat it.

This isn't an easy thing to do since if your missing just one nutrient
then the plants will slow down and the algae increase.


How can anyone possibly know without extensive expensive testing what that
nutrient can be?

Generally...


Phospate - 0.1ppm


No test for that one.

Nitrate - 5ppm


Mine stays around 15 to 20ppm, as it comes from the tap.

CO2 - 20-35ppm


No test kit for this one either.

GH - 3 ( calcium/potassium/magnesium )


Over 300 and alkaline - 7.5 and above.

You say you have no phospate - this will limit plant growth and you will
probably see green algae on the glass and leaves.


We get the red-black sooty or wiry algae.

If you have algae on the water surface it's a sure sign of overfeeding.

pH of 6.8 and KH of 3 means approx 14ppm of CO2 - the plants will grow
better if the CO2 is above 20ppm (just change your KH to 4)

Don't use any pH buffers!

--
Best regards
Mark

--
Koi-Lo....
My Pond & Aquarium Pages:
http://tinyurl.com/9do58
Troll Information:
~~~~ }((((* ~~~ }{{{{(ö ~~~~ }((((({*