Hi,
Could you please adjust your clock, you are posting from the future 28/06/06
at 19-28 hours
strip and clean wand and nozzle there may be a small amount of dust/dirt
settled in, if left outside it may be frost thats caused it, answer is to
dry thouroughly and store frost free over winter
regards
Cineman


"John" wrote in message
...
Hi, I realise I am only just on the "Fringe" posting with this, but
perhaps someone can help or direct me to a more appropriate Board.

In my garden I have a lot of paving slabs that I clean with a Karcher
power spray . The machine works fine, but I have problems with the "Wand".
I have bought two extra ones over a period and they all set off ok but
when I come to use after a winter they do not emit the same power of spray
as they did previously.
The problem is that the brass spray nozzle does not appear to fit dead
centre with the outer plastic slit thus causing it to loose a lot of
power. Well that is what it seems to me.

The result is that to get any power I am having to hold the end of the
wand to only 2" to 3" off the ground, thus reducing the width of spray and
taking forever.

Has anyone else experienced this and found an answer to the problem

Thanks for any help

John