"JimR" wrote in message
m...

"The Post Quartermaster"
wrote in message
...

"Red" wrote in message
...
On Jul 27, 6:32 pm, willshak wrote:
gashton34 wrote the following:

Hello,
I'm trying to service my Hayter self-propelled mower. I want to
be able
to get the blade off by unscrewing the nut underneath.
unfortunately it
has been put on too tight by one of those machines they use.
I've
trawled the DIY shops, but have been unable to get anything that
will do
the job. A simple sprocket set just isn't strong enough- I need
a
machine!
They must be available somewhere, but I need to know what they
are
called and where I can get one.
Thanks.

How about a Socket Wrench Breaker
bar?http://lmgtfy.com/?q=socket+wrench+breaker+bar

Absolutely. And if that doesn't do it slip a 3' piece of pipe over
the breaker bar handle.

Don't know the name of it and it's out in the workshop under tons
of other stuff, but there is a spray can of something, it foams
when applied, and you soak the culprit overnight. The next morning
you can almost loosen the thing with your fingers. If you want I'll
try to find my can and give you the name.

PB Blaster?


I'll get back to ya.
--
Careful how you respond. I have people!

JC