On Fri, 25 Apr 2003 18:23:28 GMT, "Bob Alston"
wrote:

The bubble rate you have set sounds high to me for a 20 gal. I run just
slightly less and 1 bubble per second on my 55 gallon tank. but you have
the bio wheel which will help you to lose a lot of the co2 you inject. I
would suggest you remove it.

Watch your pH level closely initially and use this calculator to calculate
your co2 level. Also watch for gasping fish - a sign of too much co2.

http://www.csd.net/~cgadd/aqua/art_plant_co2chart.htm


Thanks for the help. Looks like after several hours of this setup,
I've got - KH at 4d, PH at 6.9 for a CO2 level of nearly 15. I think
that's probably OK according to the chart on the link you gave me.
Question about the biowheel - if I take it out will I see a spike in
ammonia/nitrites?