Poly pipe fitting question
 

I need a 4-way fitting for 25mm poly pipe but the local retic specialists
say that none are made. I can get T-s but I'd need two in a cumbersome
arrangement to do what I want, so a 4-way is worth pursuing. Does anyone
know of any links to manufacturers of Poly fittings? I've googled it but
turned up only one manufacturer and lots of academic papers on water use so
far.
TIA
hoges

Poly pipe fitting question
 

heres a good aussie link that someone on this newsgroup gave to me

http://www.plasticplumbing.com.au/main.htm


"hoges" wrote in message
...
I need a 4-way fitting for 25mm poly pipe but the local retic specialists
say that none are made. I can get T-s but I'd need two in a cumbersome
arrangement to do what I want, so a 4-way is worth pursuing. Does anyone
know of any links to manufacturers of Poly fittings? I've googled it but
turned up only one manufacturer and lots of academic papers on water use
so
far.
TIA
hoges

Poly pipe fitting question
 

I tried a while ago, to obtain a 4 way, I ended up linking two "T" sections

rapdor wrote in message
...
heres a good aussie link that someone on this newsgroup gave to me

http://www.plasticplumbing.com.au/main.htm


"hoges" wrote in message
...
I need a 4-way fitting for 25mm poly pipe but the local retic
specialists
say that none are made. I can get T-s but I'd need two in a cumbersome
arrangement to do what I want, so a 4-way is worth pursuing. Does
anyone
know of any links to manufacturers of Poly fittings? I've googled it
but
turned up only one manufacturer and lots of academic papers on water use
so
far.
TIA
hoges

Poly pipe fitting question
 

Vinidex and Hardy Pope both list them, just the retailers that don't stock them.

Plastic Plumbing & Irrigation Supplies also have them in there catalogue
http://www.plasticplumbing.com.au/main.htm

"hoges" wrote:

I need a 4-way fitting for 25mm poly pipe but the local retic specialists
say that none are made. I can get T-s but I'd need two in a cumbersome
arrangement to do what I want, so a 4-way is worth pursuing. Does anyone
know of any links to manufacturers of Poly fittings? I've googled it but
turned up only one manufacturer and lots of academic papers on water use so
far.
TIA
hoges

Poly pipe fitting question
 

"Sprog" wrote in message
...
Vinidex and Hardy Pope both list them, just the retailers that don't stock
them.

Plastic Plumbing & Irrigation Supplies also have them in there catalogue
http://www.plasticplumbing.com.au/main.htm

You've got me!

I can't find a 4-way in the Vinidex other than a Rural Cross, which comes
with a threaded hole for an outlet right in the middle. Can't find a cross
in ordinary poly. Plasticplumbing was a site I checked and couldn't find
any cross or 4-way - found the site extremely frustrating while I was
blundering my way around also.

Couldn't find Hardy Pope, but did discover (if I am correct) that they are
now called Toro Australia - couldn't find a 25mm poly cross in there either.

Now I'm really confused. I think you're correct about the fact that they
exist and it is just the retailers that don't carry them. Someone must have
asked for them before now. If there are any additional hints, I'd be glad
to hear them. I really don't want to do the 2 x three-way tees because that
will involve snipping and then later reconnecting a solenoid - ordinarily
that's ok but I am working right at the very end of a l-o-n-g line of cable
here and don't want to interfere with the line here if I can help it.

Poly pipe fitting question
 

http://www.plasticplumbing.com.au/main.htm
Order Online and Downloads
Download Catalogues
Section 1
http://www.futureperfect.com.au/PPS/...1PriceBook.pdf
Page 1-10
Moulded Cross 15,20,25,32,40,50,80mm
Page 1-11
Moulded Cross 100mm

"hoges" wrote:


"Sprog" wrote in message
.. .
Vinidex and Hardy Pope both list them, just the retailers that don't stock
them.

Plastic Plumbing & Irrigation Supplies also have them in there catalogue
http://www.plasticplumbing.com.au/main.htm

You've got me!

I can't find a 4-way in the Vinidex other than a Rural Cross, which comes
with a threaded hole for an outlet right in the middle. Can't find a cross
in ordinary poly. Plasticplumbing was a site I checked and couldn't find
any cross or 4-way - found the site extremely frustrating while I was
blundering my way around also.

Couldn't find Hardy Pope, but did discover (if I am correct) that they are
now called Toro Australia - couldn't find a 25mm poly cross in there either.

Now I'm really confused. I think you're correct about the fact that they
exist and it is just the retailers that don't carry them. Someone must have
asked for them before now. If there are any additional hints, I'd be glad
to hear them. I really don't want to do the 2 x three-way tees because that
will involve snipping and then later reconnecting a solenoid - ordinarily
that's ok but I am working right at the very end of a l-o-n-g line of cable
here and don't want to interfere with the line here if I can help it.

Poly pipe fitting question
 

Thanks for the assist but they're PVC. I need poly.
hoges

"Sprog" wrote in message
...
http://www.plasticplumbing.com.au/main.htm
Order Online and Downloads
Download Catalogues
Section 1
http://www.futureperfect.com.au/PPS/...1PriceBook.pdf
Page 1-10
Moulded Cross 15,20,25,32,40,50,80mm
Page 1-11
Moulded Cross 100mm

"hoges" wrote:


"Sprog" wrote in message
.. .
Vinidex and Hardy Pope both list them, just the retailers that don't
stock
them.

Plastic Plumbing & Irrigation Supplies also have them in there
catalogue
http://www.plasticplumbing.com.au/main.htm

You've got me!

I can't find a 4-way in the Vinidex other than a Rural Cross, which comes
with a threaded hole for an outlet right in the middle. Can't find a
cross
in ordinary poly. Plasticplumbing was a site I checked and couldn't find
any cross or 4-way - found the site extremely frustrating while I was
blundering my way around also.

Couldn't find Hardy Pope, but did discover (if I am correct) that they
are
now called Toro Australia - couldn't find a 25mm poly cross in there
either.

Now I'm really confused. I think you're correct about the fact that they
exist and it is just the retailers that don't carry them. Someone must
have
asked for them before now. If there are any additional hints, I'd be
glad
to hear them. I really don't want to do the 2 x three-way tees because
that
will involve snipping and then later reconnecting a solenoid - ordinarily
that's ok but I am working right at the very end of a l-o-n-g line of
cable
here and don't want to interfere with the line here if I can help it.

Poly pipe fitting question
 

PVC to poly adapters?
They are available.
As below but section 2

"hoges" wrote:

Thanks for the assist but they're PVC. I need poly.
hoges

"Sprog" wrote in message
.. .
http://www.plasticplumbing.com.au/main.htm
Order Online and Downloads
Download Catalogues
Section 1
http://www.futureperfect.com.au/PPS/...1PriceBook.pdf
Page 1-10
Moulded Cross 15,20,25,32,40,50,80mm
Page 1-11
Moulded Cross 100mm

"hoges" wrote:


"Sprog" wrote in message
.. .
Vinidex and Hardy Pope both list them, just the retailers that don't
stock
them.

Plastic Plumbing & Irrigation Supplies also have them in there
catalogue
http://www.plasticplumbing.com.au/main.htm

You've got me!

I can't find a 4-way in the Vinidex other than a Rural Cross, which comes
with a threaded hole for an outlet right in the middle. Can't find a
cross
in ordinary poly. Plasticplumbing was a site I checked and couldn't find
any cross or 4-way - found the site extremely frustrating while I was
blundering my way around also.

Couldn't find Hardy Pope, but did discover (if I am correct) that they
are
now called Toro Australia - couldn't find a 25mm poly cross in there
either.

Now I'm really confused. I think you're correct about the fact that they
exist and it is just the retailers that don't carry them. Someone must
have
asked for them before now. If there are any additional hints, I'd be
glad
to hear them. I really don't want to do the 2 x three-way tees because
that
will involve snipping and then later reconnecting a solenoid - ordinarily
that's ok but I am working right at the very end of a l-o-n-g line of
cable
here and don't want to interfere with the line here if I can help it.