Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Bolens Tractor
Hi, i have a Bolens ST3016h, i'm looking for an Australian distributor for
possible parts and am looking for optional addons especially a tiller. Thanks Gary |
#2
|
|||
|
|||
Bolens Tractor
g'day gary,
i tried a quick google but couldn't realy find out about the model you have. anyway as for add on bits if it is a 3 point linkage system with a power take off then pretty much any brand of equipment should fit. as for engine parts yeh well that could be expensive and hard, you may have to try and adapt? we had a bolens/iseki and found that out, nice comfy tractor to drive. you may need to i'd what engine it has to seek engine parts out, ours had an isuzu diesel. this link may help if you hven't already tried it: http://sonnys_bolens.tripod.com/identifythis.htm On Fri, 27 Jun 2008 08:52:08 +1000, "Gary Smith" wrote: Bolens ST3016h With peace and brightest of blessings, len & bev -- "Be Content With What You Have And May You Find Serenity and Tranquillity In A World That You May Not Understand." http://www.lensgarden.com.au/ |
#3
|
|||
|
|||
Bolens Tractor
Hi Len, thanks for the reply, i have an ST 3016 -
http://www.sonnysbolens.com/manuals/suburban.htm\ It's a lawn Tractor, not a big one, but bigger than the standard lawn mower. 16HP Briggs twin cylinder, hydrostatic drive. I have seen a youtube clip of a similar tractor to mine using a tiller and the brochure says it can be attached. I would preferr a second hand one because i think a new one would not justify the cost. Gary "len gardener" wrote in message ... g'day gary, i tried a quick google but couldn't realy find out about the model you have. anyway as for add on bits if it is a 3 point linkage system with a power take off then pretty much any brand of equipment should fit. as for engine parts yeh well that could be expensive and hard, you may have to try and adapt? we had a bolens/iseki and found that out, nice comfy tractor to drive. you may need to i'd what engine it has to seek engine parts out, ours had an isuzu diesel. this link may help if you hven't already tried it: http://sonnys_bolens.tripod.com/identifythis.htm On Fri, 27 Jun 2008 08:52:08 +1000, "Gary Smith" wrote: Bolens ST3016h With peace and brightest of blessings, len & bev -- "Be Content With What You Have And May You Find Serenity and Tranquillity In A World That You May Not Understand." http://www.lensgarden.com.au/ |
#4
|
|||
|
|||
Bolens Tractor
oh ok gary,
i was looking for tractors as in tractors probably why i couldn't get a description of what you had. a big lawn mower, yeh they may call them lawn tractors but that is where the similarity ends, have seen many rider mower fail from over excursion of load. but would guess the rotary hoe device would have it's own power source so would not be cheap to buy new, probably almost as dear as the rider mower. you don't give an indication of where you are in the world? local is where you may have to look for a second hand unit ie.,. local being if you live in australia you may have to search all major centres at least. first suggestion would be seek out all mower dealerships that deal with bolens equipment they may know of a local client who has purchased a hoe and no longer requires it? so could mean some snail mail use or phone. would figure rural or semi-rural type areas might be the go. just as a suggestion might be more efficient to get someone in who has the equipmment to do rotary hoeing? On Sat, 28 Jun 2008 12:06:39 +1000, "Gary Smith" snipped With peace and brightest of blessings, len & bev -- "Be Content With What You Have And May You Find Serenity and Tranquillity In A World That You May Not Understand." http://www.lensgarden.com.au/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bolens 2136 | Lawns | |||
Bolens Model 1660 | About GardenBanter | |||
Bolens in Australia | Lawns | |||
tech questions on my bolens riding mower | Lawns | |||
Bolens | Lawns |