[IBC] Seperating Thread Graft
 

I have a thread graft for an elm. The branch diameter of the exiting
portion is more than double the size of the drilled hole. Is it a near
certainty that the graft has taken?

Thanks,

JIm

************************************************** ******************************
++++Sponsored, in part, by John Quinn++++
************************************************** ******************************
-- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ --
+++++ Questions? Help? e-mail +++++

[IBC] Seperating Thread Graft
 

In a message dated 6/1/2004 10:50:23 AM Eastern Daylight Time, writes:

Is it a near
certainty that the graft has taken?

Jim:

It sounds like it took to me. How long has the thread graft been in play?

Cordially,

Michael Persiano
http://hometown.aol.com/iasnob

************************************************** ******************************
++++Sponsored, in part, by John Quinn++++
************************************************** ******************************
-- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ --
+++++ Questions? Help? e-mail +++++

[IBC] Seperating Thread Graft
 

I am about to do my first thread graft with a pine, Advise?? Rodger Kessler

-----Original Message-----
From: Internet Bonsai Club ]On Behalf
Of Michael Persiano
Sent: Tuesday, June 01, 2004 2:48 PM
To:
Subject: [IBC] Seperating Thread Graft


In a message dated 6/1/2004 10:50:23 AM Eastern Daylight Time,
writes:

Is it a near
certainty that the graft has taken?

Jim:

It sounds like it took to me. How long has the thread graft been in play?

Cordially,

Michael Persiano
http://hometown.aol.com/iasnob

************************************************** **************************
****
++++Sponsored, in part, by John Quinn++++
************************************************** **************************
****
-- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ --
+++++ Questions? Help? e-mail +++++

************************************************** ******************************
++++Sponsored, in part, by John Quinn++++
************************************************** ******************************
-- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ --
+++++ Questions? Help? e-mail +++++

[IBC] Seperating Thread Graft
 

I am about to do my first thread graft with a pine, Advise??
Rodger Kessler

Thread grafts with pine are not easy. I developed a technique with
short length of plastic soda straw that I slit lengthwise and slipped
over an immature candle and a few leaves. With the straw cut, I'm
able to collapse it, fold the needles in and thread the graft through
the smallest possible channel. On the other side, the straw is removed
and the needles spring back out.

Regards,

Matt


--
TreeBay - Tips:5¢ Advice:Free

-Carpe Tree-um- (Seize the bonsai!)
'TreeBay Bonsai Tools & Supplies' (http://www.TreeBay.com)
Thank you for supporting bonsaiTALK.
------------------------------------------------------------------------
TreeBay's Profile: http://forum.bonsaitalk.com/member.p...tinfo&userid=5
View this thread: http://forum.bonsaitalk.com/showthre...?threadid=6939