Building planter from scrap lumber
 

Hi,

I'm building a couple of wooden planters from scrap lumber. The
lumber is pressure treated, but that's all I know about it. I will be
growing vegetables in the planters, so I am wondering what I should do
to treat the lumber. Should I do anything to the interior surfaces?
I'm guessing that stain or paint is not a good idea if I'm going to
eat the vegetables grown in the planter.

Thanks for the advice.

Building planter from scrap lumber
 

On Tue, 29 Apr 2008 10:59:39 -0700, TimK wrote:

Hi,

I'm building a couple of wooden planters from scrap lumber. The lumber
is pressure treated, but that's all I know about it. I will be growing
vegetables in the planters, so I am wondering what I should do to treat
the lumber. Should I do anything to the interior surfaces? I'm guessing
that stain or paint is not a good idea if I'm going to eat the
vegetables grown in the planter.

Thanks for the advice.

Pressure treated lumber made before 2003 has arsenic in it, the current
stuff uses a copper based preservative. I wouldn't use either for a
vegetable planter.

Building planter from scrap lumber
 

In article
,
TimK wrote:

Hi,

I'm building a couple of wooden planters from scrap lumber. The
lumber is pressure treated, but that's all I know about it. I will be
growing vegetables in the planters, so I am wondering what I should do
to treat the lumber. Should I do anything to the interior surfaces?
I'm guessing that stain or paint is not a good idea if I'm going to
eat the vegetables grown in the planter.

Thanks for the advice.

The short answer is that it is a VERY BAD idea, if you plan to eat the
food. If the garden is strictly ornamental, you will only be poisoning
the soil. Do not mention this to organic gardeners as they will throw a
fit. WHAT ARE YOU THINKING???

The long answer, from those who sell wood and wood products, is:
http://www.naturalhandyman.com/iip/infxtra/infpre.html

Until 2003, the preservative most commonly used in residential
pressure-treated lumber was chromated copper arsenate (CCA), an
extremely toxic chemical. Remember "Arsenic and Old Lace"? How about
that old box of rat poison you have lurking in the garage? CCA is so
toxic that the Environmental Protection Agency, over 20 years ago,
imposed strict guidelines regarding the manufacturing practices of
companies using CCA.

However, one must distinguish between the toxicity of the chemical and
the toxicity of the wood product in everyday use. Extensive studies were
done since the mid 1980's concerning the potential dangers of
pressure-treated wood. And rightfully so! Large volumes of CCA were
being used, and the treated wood products were beginning to be widely
distributed, justifying the need for some hard research.

The research was mixed, but the typical hysteria ensued as attorneys and
plaintiffs lined up to claim damages from exposure to CCA. In the end,
the industry agreed to voluntarily eliminate use of CCA for residential
use. Your local home store or lumberyard is now selling lumber treated
with (HOPEFULLY) less toxic alternatives... amine copper quat (ACQ) and
copper azone (CA)... though you may find other chemical combinations in
specific areas.

# Do not use pressure-treated wood for making cutting boards, or for any
food preparation surface.
Picnic tables made of pressure-treated wood have become common, and are
fine to use for the purpose they were intended... to serve food on (or
play cards on), not to prepare food on! They should be coated as needed
with an oil-based wood preservative to seal in the chemical preservative.
--

Billy
http://www.youtube.com/watch?v=9KVTf...ef=patrick.net
http://au.youtube.com/watch?v=7WBB0s...eature=related

Building planter from scrap lumber
 

Yikes! Thanks so much for the info. You stopped me from making a big
mistake.

I'm continually shocked by the dangerous chemicals that we are exposed
to every day, just living the American lifestyle.

Can someone suggest a safe wood for planters to grow edible plants? I
see that a lot of planters are made from cedar. Would that be safe?

Thanks again,
Tim

On Apr 29, 6:27 pm, Billy wrote:
In article
,

TimK wrote:
Hi,

I'm building a couple of wooden planters from scrap lumber. The
lumber is pressure treated, but that's all I know about it. I will be
growing vegetables in the planters, so I am wondering what I should do
to treat the lumber. Should I do anything to the interior surfaces?
I'm guessing that stain or paint is not a good idea if I'm going to
eat the vegetables grown in the planter.

Thanks for the advice.

The short answer is that it is a VERY BAD idea, if you plan to eat the
food. If the garden is strictly ornamental, you will only be poisoning
the soil. Do not mention this to organic gardeners as they will throw a
fit. WHAT ARE YOU THINKING???

The long answer, from those who sell wood and wood products, is:http://www.naturalhandyman.com/iip/infxtra/infpre.html

Until 2003, the preservative most commonly used in residential
pressure-treated lumber was chromated copper arsenate (CCA), an
extremely toxic chemical. Remember "Arsenic and Old Lace"? How about
that old box of rat poison you have lurking in the garage? CCA is so
toxic that the Environmental Protection Agency, over 20 years ago,
imposed strict guidelines regarding the manufacturing practices of
companies using CCA.

However, one must distinguish between the toxicity of the chemical and
the toxicity of the wood product in everyday use. Extensive studies were
done since the mid 1980's concerning the potential dangers of
pressure-treated wood. And rightfully so! Large volumes of CCA were
being used, and the treated wood products were beginning to be widely
distributed, justifying the need for some hard research.

The research was mixed, but the typical hysteria ensued as attorneys and
plaintiffs lined up to claim damages from exposure to CCA. In the end,
the industry agreed to voluntarily eliminate use of CCA for residential
use. Your local home store or lumberyard is now selling lumber treated
with (HOPEFULLY) less toxic alternatives... amine copper quat (ACQ) and
copper azone (CA)... though you may find other chemical combinations in
specific areas.

# Do not use pressure-treated wood for making cutting boards, or for any
food preparation surface.
Picnic tables made of pressure-treated wood have become common, and are
fine to use for the purpose they were intended... to serve food on (or
play cards on), not to prepare food on! They should be coated as needed
with an oil-based wood preservative to seal in the chemical preservative.
--

Billyhttp://www.youtube.com/watch?v=9KVTfcAyYGg&ref=patrick.nethttp://au.youtube.com/watch?v=7WBB0svwMdY&feature=related

Building planter from scrap lumber
 

On Wed, 30 Apr 2008 06:02:30 -0700, TimK wrote:

Yikes! Thanks so much for the info. You stopped me from making a big
mistake.

I'm continually shocked by the dangerous chemicals that we are exposed
to every day, just living the American lifestyle.

Can someone suggest a safe wood for planters to grow edible plants? I
see that a lot of planters are made from cedar. Would that be safe?

Thanks again,
Tim

On Apr 29, 6:27 pm, Billy wrote:
In article
,

TimK wrote:
Hi,

I'm building a couple of wooden planters from scrap lumber. The
lumber is pressure treated, but that's all I know about it. I will
be growing vegetables in the planters, so I am wondering what I
should do to treat the lumber. Should I do anything to the interior
surfaces? I'm guessing that stain or paint is not a good idea if I'm
going to eat the vegetables grown in the planter.

Thanks for the advice.

The short answer is that it is a VERY BAD idea, if you plan to eat the
food. If the garden is strictly ornamental, you will only be poisoning
the soil. Do not mention this to organic gardeners as they will throw a
fit. WHAT ARE YOU THINKING???

The long answer, from those who sell wood and wood products,
is:http://www.naturalhandyman.com/iip/infxtra/infpre.html

Until 2003, the preservative most commonly used in residential
pressure-treated lumber was chromated copper arsenate (CCA), an
extremely toxic chemical. Remember "Arsenic and Old Lace"? How about
that old box of rat poison you have lurking in the garage? CCA is so
toxic that the Environmental Protection Agency, over 20 years ago,
imposed strict guidelines regarding the manufacturing practices of
companies using CCA.

However, one must distinguish between the toxicity of the chemical and
the toxicity of the wood product in everyday use. Extensive studies
were done since the mid 1980's concerning the potential dangers of
pressure-treated wood. And rightfully so! Large volumes of CCA were
being used, and the treated wood products were beginning to be widely
distributed, justifying the need for some hard research.

The research was mixed, but the typical hysteria ensued as attorneys
and plaintiffs lined up to claim damages from exposure to CCA. In the
end, the industry agreed to voluntarily eliminate use of CCA for
residential use. Your local home store or lumberyard is now selling
lumber treated with (HOPEFULLY) less toxic alternatives... amine copper
quat (ACQ) and copper azone (CA)... though you may find other chemical
combinations in specific areas.

# Do not use pressure-treated wood for making cutting boards, or for
any food preparation surface.
Picnic tables made of pressure-treated wood have become common, and are
fine to use for the purpose they were intended... to serve food on (or
play cards on), not to prepare food on! They should be coated as
needed with an oil-based wood preservative to seal in the chemical
preservative. --

Billyhttp://www.youtube.com/watch?v=9KVTfcAyYGg&ref=patrick.nethttp://
au.youtube.com/watch?v=7WBB0svwMdY&feature=related

Cedar would be safe, so would redwood.

Building planter from scrap lumber
 

Along the same lines as the OP mentions, was wondering about utility poles
for an above ground garden border. They've been exposed to the elements for
at least 15 years. Not greasy, but dusty surface. Creosote, I believe.
Intend to wrap them with heavy plastic with excess draped length to the
inside of the garden.

--
Dave

"TimK" wrote in message
...
Hi,

I'm building a couple of wooden planters from scrap lumber. The
lumber is pressure treated, but that's all I know about it. I will be
growing vegetables in the planters, so I am wondering what I should do
to treat the lumber. Should I do anything to the interior surfaces?
I'm guessing that stain or paint is not a good idea if I'm going to
eat the vegetables grown in the planter.

Thanks for the advice.

Building planter from scrap lumber
 

On Thu, 01 May 2008 06:36:24 -0500, Dioclese wrote:

Along the same lines as the OP mentions, was wondering about utility
poles for an above ground garden border. They've been exposed to the
elements for at least 15 years. Not greasy, but dusty surface.
Creosote, I believe. Intend to wrap them with heavy plastic with excess
draped length to the inside of the garden.

The EPA is in the process of reevaluating the safety of creosote. I
wouldn't worry about the use of creosote treated wood for landscaping
but I wouldn't use it in my vegetable garden.

http://www.epa.gov/opp00001/factshee...isk_assess.htm

Building planter from scrap lumber
 

"General Schvantzkopf" wrote in message
. ..
On Thu, 01 May 2008 06:36:24 -0500, Dioclese wrote:

Along the same lines as the OP mentions, was wondering about utility
poles for an above ground garden border. They've been exposed to the
elements for at least 15 years. Not greasy, but dusty surface.
Creosote, I believe. Intend to wrap them with heavy plastic with excess
draped length to the inside of the garden.

The EPA is in the process of reevaluating the safety of creosote. I
wouldn't worry about the use of creosote treated wood for landscaping
but I wouldn't use it in my vegetable garden.

http://www.epa.gov/opp00001/factshee...isk_assess.htm

Read the link. The sublink for disposal left me at loss. I have a dozen
utility poles that have laid on my property since I bought it many years
ago. I was in the military when I made the contract to buy the land, and
did see same at time of purchase. But, was unaware of likelihood of who
owned same originally (utility poles). Apparently, PEC left them there,
local electric cooperative as best I can tell. The poles vary between 16'
and 19' in length. Not exactly something I can set out by the street for
pickup. I can drag them with much effort. The riding mower, I've found
more effective for moving same.
--
Dave

Building planter from scrap lumber
 

In article , "Dioclese"
NONE says...

Read the link. The sublink for disposal left me at loss. I have a dozen
utility poles that have laid on my property since I bought it many years
ago. I was in the military when I made the contract to buy the land, and
did see same at time of purchase. But, was unaware of likelihood of who
owned same originally (utility poles). Apparently, PEC left them there,
local electric cooperative as best I can tell. The poles vary between 16'
and 19' in length. Not exactly something I can set out by the street for
pickup. I can drag them with much effort. The riding mower, I've found
more effective for moving same.


Are you sure they are creosote treated?

How old are they?

Have you cut through any and smelled creosote? (We have ancient railway
ties that were shoring up part of a hill and in spite of being
thoroughly rotted, any sound wood still smells of creosote when cut,)

I ask because the city here occasionally takes down "old" cedar
telephone poles. Then they mill the wood and send it to a local social
agency for recycling into garden furniture and the like.

Building planter from scrap lumber
 

"phorbin" wrote in message
...
In article , "Dioclese"
NONE says...

Read the link. The sublink for disposal left me at loss. I have a dozen
utility poles that have laid on my property since I bought it many years
ago. I was in the military when I made the contract to buy the land, and
did see same at time of purchase. But, was unaware of likelihood of who
owned same originally (utility poles). Apparently, PEC left them there,
local electric cooperative as best I can tell. The poles vary between
16'
and 19' in length. Not exactly something I can set out by the street for
pickup. I can drag them with much effort. The riding mower, I've found
more effective for moving same.


Are you sure they are creosote treated?

How old are they?

Have you cut through any and smelled creosote? (We have ancient railway
ties that were shoring up part of a hill and in spite of being
thoroughly rotted, any sound wood still smells of creosote when cut,)

I ask because the city here occasionally takes down "old" cedar
telephone poles. Then they mill the wood and send it to a local social
agency for recycling into garden furniture and the like.


Poles have a black/brown appearance. To my knowledge, they were laying on
the ground for at least 15 years. Now, when I touch them, they leave a
dirty black dusty material with a touch of greasy feel to it. Washes off
with soap and water. No, its not dirt.
--
Dave

Parkinson's disease, not easy to define.
Much less cure.

Building planter from scrap lumber
 

In article , "Dioclese"
NONE says...

Poles have a black/brown appearance. To my knowledge, they were laying on
the ground for at least 15 years. Now, when I touch them, they leave a
dirty black dusty material with a touch of greasy feel to it. Washes off
with soap and water. No, its not dirt.

That sounds conclusive.

If I had them and they weren't fit for anything, I'd probably use them
as edges for a wood chip path somewhere,

Building planter from scrap lumber
 

In article ,
phorbin wrote:

In article , "Dioclese"
NONE says...

Poles have a black/brown appearance. To my knowledge, they were laying on
the ground for at least 15 years. Now, when I touch them, they leave a
dirty black dusty material with a touch of greasy feel to it. Washes off
with soap and water. No, its not dirt.

That sounds conclusive.

If I had them and they weren't fit for anything, I'd probably use them
as edges for a wood chip path somewhere,

I have some railroad ties every bit as old. I used them on the edges of
my driveway. Stuff like that (poles and ties) are excellent to use as
retaining walls to shore up embankments since it will take a zillion
years to rot. Mom and dad used poles when I was a kid to build a lovely
retaining wall at one side of the house since we lived on a sloped hill.
--
--

Peace! Om

"My mother never saw the irony in calling me a Son of a Bitch."
-- Jack Nicholson

Building planter from scrap lumber
 

"Omelet" wrote in message
...
In article ,
phorbin wrote:

In article , "Dioclese"
NONE says...

Poles have a black/brown appearance. To my knowledge, they were laying
on
the ground for at least 15 years. Now, when I touch them, they leave a
dirty black dusty material with a touch of greasy feel to it. Washes
off
with soap and water. No, its not dirt.

That sounds conclusive.

If I had them and they weren't fit for anything, I'd probably use them
as edges for a wood chip path somewhere,

I have some railroad ties every bit as old. I used them on the edges of
my driveway. Stuff like that (poles and ties) are excellent to use as
retaining walls to shore up embankments since it will take a zillion
years to rot. Mom and dad used poles when I was a kid to build a lovely
retaining wall at one side of the house since we lived on a sloped hill.
--
--

Peace! Om

"My mother never saw the irony in calling me a Son of a Bitch."
-- Jack Nicholson

Dumb me. I went all over on my land to collect correct size rocks for a
retaining wall. My front lawn runs downhill pretty radical. Now, its not
radical at all. Should have use those utility poles instead.

Would have be easier to trim grass as well with a continuous run using a
utility pole, instead of rocks with intermittent openings. Spank me.
--
Dave

Parkinson's disease, not easy to define.
Much less cure.

Building planter from scrap lumber
 

In article ,
"Dioclese" NONE wrote:

"Omelet" wrote in message
...
In article ,
phorbin wrote:

In article , "Dioclese"
NONE says...

Poles have a black/brown appearance. To my knowledge, they were laying
on
the ground for at least 15 years. Now, when I touch them, they leave a
dirty black dusty material with a touch of greasy feel to it. Washes
off
with soap and water. No, its not dirt.

That sounds conclusive.

If I had them and they weren't fit for anything, I'd probably use them
as edges for a wood chip path somewhere,

I have some railroad ties every bit as old. I used them on the edges of
my driveway. Stuff like that (poles and ties) are excellent to use as
retaining walls to shore up embankments since it will take a zillion
years to rot. Mom and dad used poles when I was a kid to build a lovely
retaining wall at one side of the house since we lived on a sloped hill.


Dumb me. I went all over on my land to collect correct size rocks for a
retaining wall. My front lawn runs downhill pretty radical. Now, its not
radical at all. Should have use those utility poles instead.

Would have be easier to trim grass as well with a continuous run using a
utility pole, instead of rocks with intermittent openings. Spank me.

You will remember next time. :-) Mom also did build one retaining wall
with rocks when she ran out of poles. She built a sloped in "Irish" wall
(or so she called it) without using any mortar. Sloped back slightly,
the dirt holds it in place.
--
--

Peace! Om

"My mother never saw the irony in calling me a Son of a Bitch."
-- Jack Nicholson