DIY Lighting
I know some of you have prolly done some light 'hacking',so maybe you
could answer my question. If I took a 48" fluorescent strip/shop light, and cut it down to 24 inches, and used 24" bulbs, would it run at the 40W per bulb of a 48" bulb, or teh 20w per bulb that 24" is rated at? Rich |
DIY Lighting
bulbs should match the ballast vice versa remember the ballast is a high
voltage transformer. Now maybe your ballast can be used for multiple types of bulbs but that;s where I'd start, look up the ballast manufacturer and check their website. "Rich Conley" wrote in message ... I know some of you have prolly done some light 'hacking',so maybe you could answer my question. If I took a 48" fluorescent strip/shop light, and cut it down to 24 inches, and used 24" bulbs, would it run at the 40W per bulb of a 48" bulb, or teh 20w per bulb that 24" is rated at? Rich |
All times are GMT +1. The time now is 07:16 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter