Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
deionized water questions
I have found myself in the posession of a small DI unit. I know a bit about DI water and I'm really excited to use it to process my 'liquid rock' tap water. I know that they sell additives to replace trace minerals and salts to DI water. Can I simply mix DI water and tap to get the right GH? I'm worried that the wrong PH buffers in any of these additives may increase algae blooms. I know you can't measure the pH of DI water. My goal is to try to get soft and slightly acidic water (peat treating if neccessary). If I mix DI and tap, can I check the PH? Thanks! |
#2
|
|||
|
|||
deionized water questions
Sherry Michael Weller wrote:
I have found myself in the posession of a small DI unit. I know a bit about DI water and I'm really excited to use it to process my 'liquid rock' tap water. I know that they sell additives to replace trace minerals and salts to DI water. Can I simply mix DI water and tap to get the right GH? Yes, this works fine. I'm worried that the wrong PH buffers in any of these additives may increase algae blooms. Using buffers to adjust pH is seldom good solution. I know you can't measure the pH of DI water. My goal is to try to get soft and slightly acidic water (peat treating if neccessary). If I mix DI and tap, can I check the PH? Yes. pH tests fail when chemical buffers have been added. Since you are wisely avoiding that path, you should be fine. |
#3
|
|||
|
|||
deionized water questions
"Dave Millman" wrote in message
... Sherry Michael Weller wrote: I have found myself in the posession of a small DI unit. I know a bit about DI water and I'm really excited to use it to process my 'liquid rock' tap water. I know that they sell additives to replace trace minerals and salts to DI water. Can I simply mix DI water and tap to get the right GH? Yes, this works fine. I'm worried that the wrong PH buffers in any of these additives may increase algae blooms. Using buffers to adjust pH is seldom good solution. I know you can't measure the pH of DI water. My goal is to try to get soft and slightly acidic water (peat treating if neccessary). If I mix DI and tap, can I check the PH? Yes. pH tests fail when chemical buffers have been added. Since you are wisely avoiding that path, you should be fine. I beg to differ..... pH test don't fail when using buffers...... All tanks with any kH or gH are buffered. Buffering is what controls/stabilizes the pH at any given value. That is the reason you need some kH, if the kH falls too low the slightest addition of acidic or alkaline material can cause major pH swings and really mess up fish. The kind and nature of the buffering controls the pH. Typically the aquarium is buffered by bicarbonate, the higher the kH (all other things being equal) the higher the pH. The reason you can't easily drop the pH in a tank with a limestone block by adding acid is that the carbonate helps maintain the bicarbonate level. Many of the cheaper buffering compounds are phosphate compounds and can cause trouble in a planted tank. They also can cause algal blooms in some circumstances. There is no real reason why you can't use pH buffers to adjust the pH in water that doesn't suit your fish. That said, I'd agree that "natural" methods are certainly probably better. My tap water has too high a gH/pH for angels to say nothing of the gH. I use RO water to get the gH into the a better range and CO2 knocks the pH down below 7.0. RO water is expensive, if I didn't have the gH problem and wasn't using CO2, I'd use something like Seachem's, acid buffer to control the pH. As it is because I use RO water I have to do occasional water changes with tap water to maintain a reasonable gH for the plants and add baking soda to maintain a kH around 4-5. What fails when you use a phosphate buffer is the relationship between kH and pH than can be used to calculate the CO2 concentration. Chuck Gadd's calculator doesn't work if the buffering is due to something other than bicarbonate. Bob |
#4
|
|||
|
|||
deionized water questions
Thanks Rob and Dave. With a bit of messing around I was able to get: GH: 10 DH -- 4-5 DH KH: 8 -- 3 After adding peat: pH: 7.2 pH: 6.8 With this kind of setup, as long I I keep the GH/KH of my water changes the same, will everything be stable? (I know I'll have to watch for the peat to exaust itself over time) |
#5
|
|||
|
|||
deionized water questions
Robert Flory wrote:
"Dave Millman" wrote in message ... Yes. pH tests fail when chemical buffers have been added. Since you are wisely avoiding that path, you should be fine. I beg to differ..... pH test don't fail when using buffers...... What fails when you use a phosphate buffer is the relationship between kH and pH than can be used to calculate the CO2 concentration. Chuck Gadd's calculator doesn't work if the buffering is due to something other than bicarbonate. Bob's right. My bad. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|