Home |
Search |
Today's Posts |
#22
|
|||
|
|||
Well, good news...... I found a 1"-40 tap and die to make a plug in the
top of my cylinder. A 1 inch hole isn't exactly what I had in mind, but it'll have to work for now. I will start with some solid bar stock for the plug if I can find it..... Chances are I'll have to turn it on the lathe before the die will accept it. That's what I'll be doing over lunch today. Probably won't finish today. I still don't know what pressure this thing will balance out at..... I couldn't find any information on that. It seems to me the 1200psi would be complete "theoretical" sublimation. I have also considered, once pressure inside the tank builds, temp should change. The CO2 will absorb heat? right? I would guess the sublimation rate will be dependant on the thermal properties of the tank......The tank will get cold, right? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Nothing I've got around here seems to winter very well | Garden Photos | |||
A truly negative skunk.... | Gardening | |||
Planting seeds in a cold frame (and negative temperatures) | United Kingdom | |||
MUFFLER,very,very,very LOUD | Lawns | |||
Aquabotanic Negative ratings | Freshwater Aquaria Plants |