Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old 10-08-2010, 02:51 AM posted to alt.home.lawn.garden
external usenet poster
 
First recorded activity by GardenBanter: May 2010
Posts: 8
Default Resin (Plastic) Plant Pot

I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate
  #2   Report Post  
Old 10-08-2010, 12:35 PM posted to alt.home.lawn.garden
external usenet poster
 
First recorded activity by GardenBanter: Jul 2006
Posts: 299
Default Resin (Plastic) Plant Pot

On Aug 9, 9:51*pm, Kate wrote:
I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. *I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate


If pot were sold for use with a base it would already have holes in
it. I assume pot sold without holes is not made for a base. Some I
have like this outside, I drill holes in side about half way down to
prevent flooding if there is a lot of rain. Rock bottom is not going
to help if pot is full of water.
  #3   Report Post  
Old 10-08-2010, 06:41 PM posted to alt.home.lawn.garden
external usenet poster
 
First recorded activity by GardenBanter: May 2010
Posts: 8
Default Resin (Plastic) Plant Pot

On 8/10/2010 4:35 AM, Frank wrote:
On Aug 9, 9:51 pm, wrote:
I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate


If pot were sold for use with a base it would already have holes in
it. I assume pot sold without holes is not made for a base. Some I
have like this outside, I drill holes in side about half way down to
prevent flooding if there is a lot of rain. Rock bottom is not going
to help if pot is full of water.

Thank you so much for this reply.

I think I will return the pot. If I drill holes in the sides, it will
ruin the look of the pot, plus it is sitting in front of my garage and
the driveway could be stained badly, eventually, with the affects of
Miracle Gro., etc., added to the watering can.
  #4   Report Post  
Old 10-08-2010, 07:24 PM posted to alt.home.lawn.garden
external usenet poster
 
First recorded activity by GardenBanter: Jan 2009
Posts: 386
Default Resin (Plastic) Plant Pot

On 8/10/2010 1:41 PM, Kate wrote:
On 8/10/2010 4:35 AM, Frank wrote:
On Aug 9, 9:51 pm, wrote:
I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate


If pot were sold for use with a base it would already have holes in
it. I assume pot sold without holes is not made for a base. Some I
have like this outside, I drill holes in side about half way down to
prevent flooding if there is a lot of rain. Rock bottom is not going
to help if pot is full of water.

Thank you so much for this reply.

I think I will return the pot. If I drill holes in the sides, it will
ruin the look of the pot, plus it is sitting in front of my garage and
the driveway could be stained badly, eventually, with the affects of
Miracle Gro., etc., added to the watering can.


Probably best. Judicious watering if in the house would be OK but
outside rain will flood it and water log it.
  #5   Report Post  
Old 11-08-2010, 02:32 AM posted to alt.home.lawn.garden
external usenet poster
 
First recorded activity by GardenBanter: Jul 2006
Posts: 846
Default Resin (Plastic) Plant Pot

Kate said:

I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.


They're called "saucers". And, I've never seen a store, that sold planters (of
any material), that didn't also stock the appropriately sized saucer.


Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?


You're not going to be achieving any sort of "drainage" by putting a bunch of
rocks at the bottom of the planter. All you will do is:

A. Make the container much heavier than it needs to be. (Might as well have
bought one that was actually carved from stone, instead of an imposter.) =)

B. Create an environment that keeps the roots of the plant in a saturated state.
The rocks and the potting mix aren't going to stay in nice, neat, separated
layers. The potting mix is going to seep down through the rocks, displacing...

You guessed it! The water that has no place to go. So, now, the water table is
rising, simply by the potting mix pushing it up. This process gets sped it up by
the dry potting mix above, absorbing the water rising from below (wicking).
Pretty soon (after many fewer waterings than you think), the entire pot has
become saturated, and with no way for the water to be removed, the plants, in
essence, drown.

You MUST provide drainage that will adequately remove the excess water from the
container. If you don't want to use it properly to contain live plants, then buy
a quality "fake" plant to put in it.

--

Eggs

-I went to a seafood disco rave last week.... and pulled a mussel.


  #6   Report Post  
Old 17-08-2010, 08:36 AM posted to alt.home.lawn.garden
external usenet poster
 
First recorded activity by GardenBanter: May 2010
Posts: 8
Default Resin (Plastic) Plant Pot

On 8/10/2010 6:32 PM, Eggs Zachtly wrote:
Kate said:

I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.


They're called "saucers". And, I've never seen a store, that sold planters (of
any material), that didn't also stock the appropriately sized saucer.


Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?


You're not going to be achieving any sort of "drainage" by putting a bunch of
rocks at the bottom of the planter. All you will do is:

A. Make the container much heavier than it needs to be. (Might as well have
bought one that was actually carved from stone, instead of an imposter.) =)

B. Create an environment that keeps the roots of the plant in a saturated state.
The rocks and the potting mix aren't going to stay in nice, neat, separated
layers. The potting mix is going to seep down through the rocks, displacing...

You guessed it! The water that has no place to go. So, now, the water table is
rising, simply by the potting mix pushing it up. This process gets sped it up by
the dry potting mix above, absorbing the water rising from below (wicking).
Pretty soon (after many fewer waterings than you think), the entire pot has
become saturated, and with no way for the water to be removed, the plants, in
essence, drown.

You MUST provide drainage that will adequately remove the excess water from the
container. If you don't want to use it properly to contain live plants, then buy
a quality "fake" plant to put in it.

Sorry for this late reply, but you are right on.

I decided against this pot. Walmart and Lowe's did not have the right
sized saucer.

Thanks for your input. Much appreciated.
  #7   Report Post  
Old 17-08-2010, 08:37 AM posted to alt.home.lawn.garden
external usenet poster
 
First recorded activity by GardenBanter: May 2010
Posts: 8
Default Resin (Plastic) Plant Pot

On 8/10/2010 11:24 AM, Frank wrote:
On 8/10/2010 1:41 PM, Kate wrote:
On 8/10/2010 4:35 AM, Frank wrote:
On Aug 9, 9:51 pm, wrote:
I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate

If pot were sold for use with a base it would already have holes in
it. I assume pot sold without holes is not made for a base. Some I
have like this outside, I drill holes in side about half way down to
prevent flooding if there is a lot of rain. Rock bottom is not going
to help if pot is full of water.

Thank you so much for this reply.

I think I will return the pot. If I drill holes in the sides, it will
ruin the look of the pot, plus it is sitting in front of my garage and
the driveway could be stained badly, eventually, with the affects of
Miracle Gro., etc., added to the watering can.


Probably best. Judicious watering if in the house would be OK but
outside rain will flood it and water log it.

True, and I will end up with roots that are rotting.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GÃœRTAN PLASTIC - PLASTIC CRATES,PALLETS and ALL TYPE OF PLASTIC PRODUCTS [email protected] Edible Gardening 0 05-06-2007 08:11 AM
offer:flower pot,Products including Ceramic Flower Pot,Imitate Porcelain Flower Pot,Wood Flower Pot,Stone Flower Pot,Imitate Stone Flower Pot,Hanging Flower Pot,Flower Pot Wall Hanging,Bonsai Pots,Root Carving&Hydroponics Pots [email protected] Texas 0 07-09-2004 06:55 PM
Resin/fibre glass sinks Misty United Kingdom 0 09-06-2004 05:40 PM
Resin/fibre glass sinks Misty United Kingdom 0 09-06-2004 04:52 PM
Resin/fibre glass sinks Misty United Kingdom 0 09-06-2004 03:55 PM


All times are GMT +1. The time now is 07:27 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 GardenBanter.co.uk.
The comments are property of their posters.
 

About Us

"It's about Gardening"

 

Copyright © 2017