Home |
Search |
Today's Posts |
#1
|
|||
|
|||
New deck for Honda HRG415C
My parents have had a Honda HRG415 for a few years now. Engine still runs very nicely but the deck has started to rust and now has a large hole in it which allows grass cuttings to blow everywhere when mowing. The hole is about 4 inches long and half an inch wide.
I've had a quick look and although there are spares online for every other part of the mower I can't find a replacement deck. Does anyone have any idea where I could get one from? I thought if I couldn't get a replacement it could be welded. Does anyone know what sort of place could do that? Another quick question: the blade is pretty blunt now, is it more economical to buy a replacement blade or should I get the existing one sharpened? Thank you |
#2
|
|||
|
|||
New deck for Honda HRG415C
I would assume that the deck can easily be welded, at a minimal expense if
you find the right shop. Try to find a small machine shop or welding shop, and take it to them for an estimate. Welds of this type don't always look great (an obvious patch) but functionally, they are perfect. I know because I have one done, and the old deck then outlasted the engine. For the blade, call any mower shop and tell them your model mower, and ask them for a new blade price and a sharpening price. The sharpening price should be cheaper. Make sure that they balance the blade when they sharpen it, otherwise you will get vibration. Hope this helps. James |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
New doors to the deck and the view from kitchen - DSC_0496a.jpg | Garden Photos | |||
Honda Izy Hrg415c Pde | Lawns | |||
New mowing deck for old Craftsman tractor needed | Lawns | |||
New Grass Catcher for Newer Craftsman LT w/36" Deck | Lawns | |||
Drive Belt Tension on Honda Mower? | Lawns |