Flywheel removal on B&S lawnwmower engine to get to ignition points ?
I want to remove the flywheel on 2 rotary mowers with 3-4.5 B&S
engines . The method I ahve used it the past on similar engines isn't working . - ( I have removed the nut , squirted penatrant around the sahft, tapped the end of the shaft ( protected by a wood block ) while a helper prys on the flywheel .) Waht else can I do ? |
wrote in message ... I want to remove the flywheel on 2 rotary mowers with 3-4.5 B&S engines . The method I ahve used it the past on similar engines isn't working . - ( I have removed the nut , squirted penatrant around the sahft, tapped the end of the shaft ( protected by a wood block ) while a helper prys on the flywheel .) Waht else can I do ? Go down to the hardware store at blow the five bucks for a "flywheel puller" so you don't really screw something up! |
Try using a stanley or any brand pulley puller, worked for me a couple days
ago on a 10hp briggs. wrote in message ... I want to remove the flywheel on 2 rotary mowers with 3-4.5 B&S engines . The method I ahve used it the past on similar engines isn't working . - ( I have removed the nut , squirted penatrant around the sahft, tapped the end of the shaft ( protected by a wood block ) while a helper prys on the flywheel .) Waht else can I do ? |
|
All times are GMT +1. The time now is 12:05 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter