Home |
Search |
Today's Posts |
#1
|
|||
|
|||
using blue photodiode for PAR
I would like to make a number of small sensors for a plant study for use
with a 0-5v data logger, that would somewhat approximate a PAR quantum sensor. There are a few small good quality blue photodiodes available that approximate the spectral sensitivity curve of the human eye 400 to 700 nm (centered near 555nm or so). The Sharp BS520 from Digikey is an example. But PAR supposedly has very sharp cut-offs at 400 and 700 nm, but otherwise flat from 400-700nm. . Can I correct the spectral curve of one of these blue photodiodes using Kodak color compensating gels (some call them Wratten filters) and have some success? My overlays of the filter charts would indicate that using both a CC50R (red) and a CC50B (blue) together in front of the diode would just about do it. Does anyone see any big problems with my reasoning with this. I don't have equipment to analyze the photodiode/filter combo, but DO have access to a Quantum sensor to compare. Thanks Jim |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Blue moon - blue moon.jpg | Garden Photos | |||
In my garden July 27 Honeybee Airways 123, now arriving on the Blue Concourse (actually a Blue Butterfly delphinium.JPG (1/1) | Garden Photos | |||
POE 2007 - Vanda Pakchong Blue 'Devera' - deep blue LARGE vanda | Orchid Photos | |||
planting blue rug juniper and blue star juniper | Gardening | |||
Blue Tomatoes/Blue tomatoe seeds | Edible Gardening |