Home |
Search |
Today's Posts |
#1
|
|||
|
|||
How long does a UV clarifier take?
Hi
I only have a 1064L pond (about 1.4m x 1.9m x 0.4m), and have been trying for a year and half to make it clear naturally. So have pond plants and a normal bio filter (one of them boxes with foam and sections of pipes in it). But have failed to clear it naturally so installed a Tetra 9W 8000L UV clarifier. Its installed just before the water goes into the filter. The guy at the garden centre said it should take 4 to 5 days and it will end up crystal clear. But its been on about a week now and I cant see any difference, pond is still pea soup. I can only see an inch or two down. The filter light is on indicating it working (although I assume UV light is invisible so I cant tell if the bulbs are working but the bulbs dont look broken). I dont know what pump is being used. I wondered how long these things usually take to work? And if it clearly is not working what could cause it to not work considering the UV clarifier is working and the bulbs dont look broken. Thanks! |
#2
|
|||
|
|||
How long does a UV clarifier take?
That's interesting... My Aquaultraviolet UV said to install it just
*after* the filter, on the return... The thing about UV is that the bulbs really need to be replaced every year because they become ineffective, and it's really important to get the right amount of UV for your pond size. I always oversize these things. It's also important to have the flow high enough so that the water is getting changed over at the correct rate too. I'm not sure of the requirements or size limitations for the Tetra UV. 9 watts seems really small, but maybe that's because I'm used to a larger pond. The first thing I'd verify is that you really want to put the UV *before* your filter. Doesn't UV kill the good bacteria? Then check the flow requirements for the UV and the pond size limitations. Oh, and for mine, it takes only a few days to notice a big difference. - Dave |
#3
|
|||
|
|||
How long does a UV clarifier take?
Hi, I have a little more info on this.
I checked the manual for my UV, and it says that the best place to install it is after the filter. "If an after filter installation is not feasible, your sterilizer can be installed before the filter, but it will take a little longer to work." The unit I have can be used to clarify or sterilize, so that's why it's referring to the unit as a sterilizer. It goes on to say that if you do a pre-filter installation, you should be aware that even a small stone can pass into the unit and cause breakage. Good point. Also, "Ultraviolet light does not discriminate about what it destroys. If good bacteria passes by the light it will be destroyed." So, the takeaways a It takes longer for a clarifier to work if it's before your filter, there's more risk of breakage if it's before your filter and it will kill good bacteria if it passes through. Normally the bacteria won't be free floating like that, but if you're seeding your pond and your filter with bacteria, you'll want to keep the UV off until they've colonized in your filter and on the pond walls. Maybe it's just your placement of the UV that's making things take longer. If you really have pea-soup water, you'll need to be actively cleaning your filter, since it should be filling up with the dead stuff. I'm not sure what kind of filter you have capacity-wise, etc. but that may be a consideration as well. My first pond was installed by a landscaper who didn't specialize in ponds. I was naive enough to believe it when he said he was an expert on pond construction. I quickly learned more than that landscaper after I ran into problems like green water. In the case of that pond, the pump was undersized for the pond size, the "filter" was one of those small pass-through filters that sits on the bottom of the pond, and the pond was put smack under several healthy pine, sycamore, and maple trees, which made for a memorable Fall clean-up. The next summer, I ended up enlarging the pond (just cuz), adding a skimmer, adding a bead filter, adding UV and tossing the pond-bottom filter. I suppose those work for very small ponds, but I wasn't impressed with the one I had and they're a pain to clean. That pond was about 3,500 gallons and the filter was useless for that. Without mentioning any names, it's the same kind of "pond filter" you can find in your local pet store. That pond was still a pain because of the trees, but the skimmer was a godsend and the UV, larger pump and better filter kept the water clear. The combination of flow, filtration and UV (if you opt for it) is important, because the whole system needs to be matched. A wimpy pump on a beasty filter or correctly-sized UV will not do much good. So, try to make sure that all the pieces are spec'd for each other. I mentioned before that I tend to oversize all these things and that's because I've found that it doesn't take long before you have more fish in the pond than you ever intended. Fish aren't big on abstinence. Over-sizing the filtration and such gives you a little more time to deal with that inevitable problem. Anyway, I hope the extra UV info might be of some use. This is the tough time of year algae-wise, so hang in there. Best, Dave |
#4
|
|||
|
|||
Thanks for your replies.
Clarifier after the filter... thats interesting. I checked the manual and doesn't even say where to put it! I thought I heard the guy at the garden centre say where to put it, but I could be mistaken. I remember now, I think he said "the UV filter will kill the algae then the bacteria in the filter will clean up the dead algae" or something like that so I assumed UV first, filter second. I'll have to call them up and ask them. The manual does recommend a Tetra pump to use with this filter, perhaps my pump is too fast or something (I read in another post someone saying the flow could be too fast for the clarifier). |
#5
|
|||
|
|||
Oh i remember the garden centre guy saying the clarifier can be fitted to the top of the filter which is what I have donw. I was going to move the clarifier after the filter but realised from the filter to the pond is gravity fed, and the pond to filter is pump fed. If I moved the clarifier it would have to be below the filter and be gravity fed and I dont have room for that so will leave it where it is and see if it works.
|
#6
|
|||
|
|||
another question though... is UV light invisible? I just found one website saying you can monitor the light through the inlet/outlet. I thought it was invisible. If you can see it them my clarifier is not emitting any visible light.
|
#7
|
|||
|
|||
How long does a UV clarifier take?
Pea soup algae grow because there is excess ammonia or nitrates in the pond.
The filter needs to remove the algae faster than the remaining algae can reproduced due to the excess wastes. OR, reduce the waste load. How many fish in this 280 gallon pond? UV doesnt kill the algae, it clumps them so they are less likely to slip thru the filter. If your filter isnt removing the clumped algae, then they putting the nutrients right back into the pond. If you put polyester batting into your filter you will remove that algae, but then you need to take the batting out when it is loaded and either clean it (squeeze into clean water) or toss it and add more batting. A UV filter does work better after the filter if there are a lot of "solids" in the water. Other "stuff" protects the algae from the UV. Often the glass in the chamber that holds the UV bulb becomes clogged with algae, etc. so it is necessary to clean the "window" or the bulb itself. UV lights can last years as long as other measures are taken to keep waste levels low. Like a veggie filter. Ingrid On Sat, 5 Apr 2008 16:24:00 EDT, lawr_1 wrote: I only have a 1064L pond (about 1.4m x 1.9m x 0.4m), and have been trying for a year and half to make it clear naturally. So have pond plants and a normal bio filter (one of them boxes with foam and sections of pipes in it). But have failed to clear it naturally so installed a Tetra 9W 8000L UV clarifier. Its installed just before the water goes into the filter. |
#8
|
|||
|
|||
How long does a UV clarifier take?
They dont become ineffective in a year.
The slower the flow the more likely that the algae will be exposed the correct amount of UV to cause clumping. the good bacteria are not in the water, they form colonies ON the biofilter material. Ingrid On Sat, 5 Apr 2008 19:14:56 EDT, Pond Addict wrote: The thing about UV is that the bulbs really need to be replaced every year because they become ineffective, It's also important to have the flow high enough so that the water is getting changed over at the correct rate too. I'm not sure of the requirements or size limitations for the Tetra UV. The first thing I'd verify is that you really want to put the UV *before* your filter. Doesn't UV kill the good bacteria? |
#9
|
|||
|
|||
How long does a UV clarifier take?
It is unlikely that anybody is going to shell out the money for an actual water
sterilizer for the pond. Nor is it necessary. My UV has its own itty bitty pump, a maxi 1000 http://weloveteaching.com/puregold/care/hardware.html this clears algae out of a 1600 gallon pond. I have a big pump for my veggie filter, altho that too may be oversized but it gives a nice waterfall on the other end. Ingrid On Sun, 6 Apr 2008 02:21:13 EDT, Pond Addict wrote: The unit I have can be used to clarify or sterilize, so that's why it's referring to the unit as a sterilizer. |
#10
|
|||
|
|||
How long does a UV clarifier take?
On Sat, 5 Apr 2008 16:24:00 EDT, lawr_1
wrote: I only have a 1064L pond (about 1.4m x 1.9m x 0.4m), and have been trying for a year and half to make it clear naturally. So have pond plants and a normal bio filter (one of them boxes with foam and sections of pipes in it). But have failed to clear it naturally so installed a Tetra 9W 8000L UV clarifier. Its installed just before the water goes into the filter. The guy at the garden centre said it should take 4 to 5 days and it will end up crystal clear. But its been on about a week now and I cant see any difference, pond is still pea soup. I can only see an inch or two down. The filter light is on indicating it working (although I assume UV light is invisible so I cant tell if the bulbs are working but the bulbs dont look broken). I dont know what pump is being used. I wondered how long these things usually take to work? And if it clearly is not working what could cause it to not work considering the UV clarifier is working and the bulbs dont look broken. If you don't know how much water the pump is flowing through the UV, you might have missed an important requirement of UV clarifiers. The water flowing through the filter has to be in contact with enough UV to work. If the water flows too fast it doesn't have enough UV light contact. I doubt the flow is too slow, that would cause the UV to kill algae and more types of bacteria too. This chart indicates the max flow of your pump would be 900gph. Your 1064L pond is about the size of my hot tub pond and I'm running a 1200gph pump on it, so I would have to reduce the flow or get a larger UV clarifier for my set up. http://tinyurl.com/4ycxql You might have better luck at seeing the blue light coming from a UV clarifier/sterilizer at night. (My bulb is rated for 11 months use and comes with a caution that it is harmful to eyes and skin, so I wouldn't spend a lot of time looking for it in the daylight.) -- Hal Middle Georgia, Zone 8 http://tinyurl.com/2fxzcb |
#11
|
|||
|
|||
How long does a UV clarifier take?
I've noticed a dramatic difference with bulbs that are old vs. new,
and the material I've read does say that the bulbs become ineffective after about 14 months of use (so maybe every two years). Yes, they still light up, but they're not doing what they're supposed to be doing. My experience backs that up. I expect that the bulbs don't just suddenly become ineffective one day, but rather it's a gradual decline over time. Replacing them earlier may not strictly be necessary but it can improve performance. My UV sterilizer has wipers on it, and the chambers are most definitely not filling up with algae. Rather, the bulbs themselves become less effective over time. However, in a situation where the UV is before the filter, I think you could have a major "gunk up" problem that would make the unit ineffective. The "sterilizer" vs "clarifier" difference is only based on the size of the unit compared to the size of your pond. I agree you don't need a unit acting as a sterilizer, but a sterilizer is just the same "clarifier" unit, handling a smaller water capacity. At least that's how the Aqua Ultraviolet units are. You're right, the UV doesn't kill the algae, it sterilizes the free- floating stuff. It kills smaller things that pass through it such as bacteria, viruses, fungi and so on. I'm surprised to hear that you need UV with a vegie filter. Isn't the veggie filter alone enough to control the algae or do you use the UV for other reasons? - Dave |
#12
|
|||
|
|||
I'll have to see if I can find the pump flow, maybe it is too fast.
The bulb is clean, I removed and checked it yesterday, there was no build up. One issue I found... I cannot see any UV light. At the inlet and outlet I have a section of clear pipe I have used to connect the outlet/inlet to my pump/pond hose (it was too big for a standard garden hose size and B&Q didnt have any adapters - I had to cut up my snorkel to make it). So its night now, and I can bend the clear pipe connector down a bit to look right into the UV clarifier outlet while the water is flowing. It is completely dark, no light at all. Yesterday I took the bulb out to look and it doesnt look like its blown. So could the bulb be faulty? Should I see UV light? I am not looking long as I know its harmful. If you cant see the light the only thing I can think of is my flow is too fast. Or am I expecting too much in 1 week? Should I give it more time? Thanks for your replies. |
#13
|
|||
|
|||
How long does a UV clarifier take?
On Sun, 6 Apr 2008 11:10:53 EDT, lawr_1
wrote: another question though... is UV light invisible? I just found one website saying you can monitor the light through the inlet/outlet. I thought it was invisible. If you can see it them my clarifier is not emitting any visible light. Even though we use the bulb for the UV, I doubt one can be reasonably priced that is invisible. Mine emits a blue light. I did use a small length of clear tubing on either side of the clarifier so that I could see if the bulb is working and it shows up well at night. The UV bulbs are sensitive to moisture in the chamber and mine blows a bulb at a figment of the imagination. -- Hal Middle Georgia, Zone 8 http://tinyurl.com/2fxzcb |
#14
|
|||
|
|||
I checked my pump, its a Hozelock Cascade 1400 which pumps 1400 litres per hour, but the recommended for the UV clarifier is Tetra Pond FP 2500 which pumps 2500 litres per hour.
So it looks like its not to do with too fast a flow. I would have thought a slower flow means more chance of UV working? So therefore should I see the UV light as there is none showing. Its the last thing I can think of, that the bulb is not working or something. Thanks |
#15
|
|||
|
|||
How long does a UV clarifier take?
My bulbs glow blue as well. In bright (ambient) light that can be hard
to see, but it's very apparent in low light. Dave |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|
Similar Threads | ||||
Thread | Forum | |||
How long does it take zucchinis flowers to open? | Edible Gardening | |||
How long does it take koi eggs to hatch? | Ponds | |||
How long does it take | Permaculture | |||
How long does it take compost to decompose? | Gardening | |||
how long does it take for dunks to work? | Ponds |