suggestion for a flat metal waterfall
 

Im just about to start building a pond which will be 3ft. below ground and 3
ft.above.The walls will be from concrete blocks laid on their side (9 inches
wide) then a liner inside the wall.
Im looking to purchase some sort of flat metal plate that I can run the feed
from the pressurised filter down into the pond and create some sort of
waterfall.
Does anyone know of where I might be able to buy this from please?

suggestion for a flat metal waterfall
 

block is expensive takes up a lot of space, wood is cheap and 4 inches thick. build
a stud wall instead. http://weloveteaching.com/mypond/2000/p2000.htm
look for flat plastic panels instead of metal. Ingrid


"Adrian Underwood" wrote:
Im just about to start building a pond which will be 3ft. below ground and 3
ft.above.The walls will be from concrete blocks laid on their side (9 inches
wide) then a liner inside the wall.
Im looking to purchase some sort of flat metal plate that I can run the feed
from the pressurised filter down into the pond and create some sort of
waterfall.
Does anyone know of where I might be able to buy this from please?




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List Manager: Puregold Goldfish List at
http://weloveteaching.com/puregold/
sign up: http://groups.google.com/groups/dir?...s=Group+lookup
www.drsolo.com
Solve the problem, dont waste energy finding who's to blame
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I receive no compensation for running the Puregold list or Puregold website.
I do not run nor receive any money from the ads at the old Puregold site.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Zone 5 next to Lake Michigan