Iris's blooming...Pipe to barrel fitting
 

WOW, what a jury rigged pice of crap yu went through when a simple
readily available seal made for crap like that would have worked and
only cost about $2.49.....you sure were not blessed with any ****ing
brains for a so called high education asshole were you. Not the first
bit of common sense anywhere in any of your posts Jimmy boi..are you
sure you did not have a stroke like syphills did?


On Sat, 26 May 2007 07:35:57 CST, Phyllis and Jim
wrote:

Gary,

Here is a link.

I went out and took a pic of the joint where we have brought our exit
pipe into the plastic upflow barrel that feeds one of our berm ponds.
You can see from the pic how we did it. The joint has held about a
decade. Essentially, we worked the epoxy paste down into the gaps and
formed a complete collar about 3/4" wide. The epoxy does not bond to
the plastic, but it is a complete and rigid seal and is stiff enough
that the barrel cannot flex loose. On the inside, we put JB Weld over
the epoxy. Probaby not needed. The cut through the barrel is NOT
perfectly round. That means the epoxy cannot be rotated.

http://groups.google.com/group/The-F...7d0c29442524f6

Jim



-------
I forgot more about ponds and koi than I'll ever know!