How To build My Homemade Waterfall?
It is time for me to start thinking about making my waterfall and
stream. I don't want to necessarily spend $300 - $400 on a Aquafalls container so any ideas on how to make something simular? My input will be 2" pvc and I prefer it to be into the bottom of the falls unit. Anyone know of any barrel that would work for this function? I do have an idea that will work (with alot of silicon) but not sure I could find a container that would be shaped right - much less have a 2" hole in the side/bottom. This waterfall container will not act as a filter but probably should be able to support a 2' wide falls. Any waterfall/stream designs would be helpful too. Thanks Rick |
How To build My Homemade Waterfall?
|
How To build My Homemade Waterfall?
Rick,
I have seen the stock water troughs set at a slight angle for the water to flow over the front edge. They are being used as upflow filter units that feed a waterfall. -- RichToyBox http://www.geocities.com/richtoybox/pondintro.html "Chester Deja" wrote in message om... It is time for me to start thinking about making my waterfall and stream. I don't want to necessarily spend $300 - $400 on a Aquafalls container so any ideas on how to make something simular? My input will be 2" pvc and I prefer it to be into the bottom of the falls unit. Anyone know of any barrel that would work for this function? I do have an idea that will work (with alot of silicon) but not sure I could find a container that would be shaped right - much less have a 2" hole in the side/bottom. This waterfall container will not act as a filter but probably should be able to support a 2' wide falls. Any waterfall/stream designs would be helpful too. Thanks Rick |
All times are GMT +1. The time now is 04:08 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter