Extra Liner
 

Well I am glad I did the measurements the way I did when I order my liner. I
used the method of length x width x deepest depth. I have tons of extra
liner, but we had not problems installing it. Me and the SO had EPDM in both
ponds, with plumbing booted in under two hours. Not bad.

And to boot...when we were done, my SO says to me, "Cool...we have enough
leftover for a stream." God, I love her.

--
BenignVanilla
Experience is something you don't get until just after you need it.
tibetanbeefgarden.com

Remove MYFRONTALLOBE to email me.

Extra Liner
 

On Wed, 30 Apr 2003 13:19:51 -0400, "BenignVanilla"
m wrote:

Well I am glad I did the measurements the way I did when I order my liner. I
used the method of length x width x deepest depth. I have tons of extra
liner, but we had not problems installing it. Me and the SO had EPDM in both
ponds, with plumbing booted in under two hours. Not bad.

Does this mean you installed the bottom drain before filling? I guess some
do it this way. I like to fill and drain before cutting the liner, that way
the water works the liner into all the corners so there won't be any
pull/stretch on the bottom bulkheads or pipe boots. ~ jan

See my ponds and filter design:
http://users.owt.com/jjspond/

~Keep 'em Wet!~
Tri-Cities WA Zone 7a
To e-mail see website


-----------== Posted via Newsfeed.Com - Uncensored Usenet News ==----------
http://www.newsfeed.com The #1 Newsgroup Service in the World!
-----= Over 100,000 Newsgroups - Unlimited Fast Downloads - 19 Servers =-----

Extra Liner
 

"~ jan" wrote in message
...
On Wed, 30 Apr 2003 13:19:51 -0400, "BenignVanilla"
m wrote:

Well I am glad I did the measurements the way I did when I order my
liner. I
used the method of length x width x deepest depth. I have tons of extra
liner, but we had not problems installing it. Me and the SO had EPDM in
both
ponds, with plumbing booted in under two hours. Not bad.

Does this mean you installed the bottom drain before filling? I guess some
do it this way. I like to fill and drain before cutting the liner, that
way
the water works the liner into all the corners so there won't be any
pull/stretch on the bottom bulkheads or pipe boots. ~ jan

Even worse...I installed...lined...and then filled...and that's when I
remembered that I had not bought a large clamp for the bottom drain. So
right now, I have a Beckal Boot on my bottom drain with no clamp. Over the
past week...I do not detect any water loss. Of course, I must mention that
my ground here is like concrete. The builders took the top soil away when
they built the houses. Just a few hours after digging the ground is rock
hard, and nearly impenetrable. I dug the hole, and dug the trench for the
bottom drain pipes. I then waited a few weeks. Then I put the plumbing in
and backfilled with a wet slurry of this material and waited for it to dry.
My pipe is nearly cemented into the ground. If it ever moves/leaks...I will
be surprised. I hope I did not just jinx myself.

BV.