Advice for pressurized filter
I am building a small pond (about 1000 eff gals) with a waterfall, and
don't have much room to work with. I was orinally going to use an 'upstream' filter with a waterfall weir (Atlantic Gardens BF1500)- but the size constraints make this difficult to accomodate. Instead I am thinking of using a pressurized filter. I'm planning on running the outlet of the filter to the top of the waterfall. The waterfall will be about 3'-4' above the water level. I don't want to lay out the $$$ for a bead filter, so I'm looking at the various pressurized bio/mechanical filters such as Oase, Cyprio & others. Any recommendations on the best filter to use in this scenario, and any experiences using the outputs for a waterfall this size? I'll be pumping about 1000gph through 1.25" tubing, with a pond skimmer on the opposite end of the waterfall. Thanks for your help! |
All times are GMT +1. The time now is 05:51 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter