HELP!! PLUMBING
 

I got a new waterfall that has a bulkhead fitting on it. I got a male
fitting to reduce the size to my water hose and it screws in by hand
real easy about 1/2 way then it gets hard. Do you use a wrench to
tighten it all the way? Is it supposed to be tight like that? Should
threads still be showing after its tight? They are PVC fittings. I know
I have to use teflon tape also. As you see I'm no plumber.



http://community.webtv.net/rebeljoe/POND

HELP!! PLUMBING
 

PVC fittings for irrigation have tapered threads. They are really tight
after a couple of turns. Make sure you get the adapter for hose fitting.
That adapter has no taper. It should tighten easily by hand.

REBEL JOE wrote:

I got a new waterfall that has a bulkhead fitting on it. I got a male
fitting to reduce the size to my water hose and it screws in by hand
real easy about 1/2 way then it gets hard. Do you use a wrench to
tighten it all the way? Is it supposed to be tight like that? Should
threads still be showing after its tight? They are PVC fittings. I know
I have to use teflon tape also. As you see I'm no plumber.

http://community.webtv.net/rebeljoe/POND

HELP!! PLUMBING
 

In our shop yes we use a Teflon tape or dope on all fittings even
compression type. It makes a good fit and it comes apart easier.

"RichToyBox" wrote in message
news:QuXic.34756$_L6.1976045@attbi_s53...
Plumbing pipe threads are tapered, so they tighten as you twist them in.
They do need teflon tape or teflon pipe dope to assure a watertight
fitting.
--
RichToyBox
http://www.geocities.com/richtoybox/pondintro.html
"REBEL JOE" wrote in message
...
I got a new waterfall that has a bulkhead fitting on it. I got a male
fitting to reduce the size to my water hose and it screws in by hand
real easy about 1/2 way then it gets hard. Do you use a wrench to
tighten it all the way? Is it supposed to be tight like that? Should
threads still be showing after its tight? They are PVC fittings. I know
I have to use teflon tape also. As you see I'm no plumber.



http://community.webtv.net/rebeljoe/POND

HELP!! PLUMBING
 

Plumbing pipe threads are tapered, so they tighten as you twist them in.
They do need teflon tape or teflon pipe dope to assure a watertight fitting.
--
RichToyBox
http://www.geocities.com/richtoybox/pondintro.html
"REBEL JOE" wrote in message
...
I got a new waterfall that has a bulkhead fitting on it. I got a male
fitting to reduce the size to my water hose and it screws in by hand
real easy about 1/2 way then it gets hard. Do you use a wrench to
tighten it all the way? Is it supposed to be tight like that? Should
threads still be showing after its tight? They are PVC fittings. I know
I have to use teflon tape also. As you see I'm no plumber.



http://community.webtv.net/rebeljoe/POND