filtration
 

i previously had two canister type filters on my 2000g pond.one was
rated for 500g and the other for 250g. i thought one was rated for 750g
but 750g was it's max flow rate. these filters clogged weekly and i
could clean them in the morning and by sunset they would be very dirty
again. i don't want to clean my filters any more than a couple times a
month.

i had one 20w uv light in place which keeps the water from turning
green and a verly large ammount of plants, almost enough to cover the
whole bootom. i also kept the fish load to a minimum, maybe a couple
dozen 4-5" goldfish or smaller.

the water quality wasn't bad but there's a lot of suspended
particulate in there, cleaning those two small filters might help out
more, but i'm not ready to do that. the water color is also yellow. i
belive this is due to the peat in the soil that i use for all my plants
but i'm not very worried about the color as i am about the floating
stuff which is very unsightly.

i have put together a 40g rubbermade tub filter. i have plumbed a 3/4"
intake and 2x 3/4" exhaust pipes which go into my waterfall. my
question, based on the above, is what kind of filter media should i
use? i currently only have bio-balls in there for biological
filtration. something for mechanical filtration would be good. i need
something cheap and doesn't clog easily. i don't care if it was
designed for ponds or not so long as it helps out and doesn't negativly
affect the life in the pond.

what would you guys say?

you can see tons of pictures at http://www.rserve.biz/gallery2

wrote in message
ups.com...
i don't care if it was
designed for ponds or not so long as it helps out and doesn't negativly
affect the life in the pond.
=============================
I use a pond filter pad that's sold by the foot at a pond and aquarium store
in Nashville TN. It only needs cleaning about every 10 days once the
"peasoup" of spring passes. It's black in color, about 1" thick and doesn't
rapidly clog. If there's a lot of particles floating on the water I use a
Tetra green foam filter pad on top of the black filter material for a week
or two. It catches finer particles but clogs rapidly.
--
McKoi.... the frugal ponder...
EVERYONE: "Please check people's headers for forgeries
before flushing." NAMES ARE BEING FORGED.
Do not feed the trolls.
~~~ }((((o ~~~ }{{{{o ~~~ }(((((o

Try the plastic webbing we use for screens doors. You can wad it up or make
a bag and pack it with 100% polyester quilt batting. ~ jan

On 11 Jun 2005 13:01:05 -0700, " wrote:

i previously had two canister type filters on my 2000g pond.one was
rated for 500g and the other for 250g. i thought one was rated for 750g
but 750g was it's max flow rate. these filters clogged weekly and i
could clean them in the morning and by sunset they would be very dirty
again. i don't want to clean my filters any more than a couple times a
month.

i had one 20w uv light in place which keeps the water from turning
green and a verly large ammount of plants, almost enough to cover the
whole bootom. i also kept the fish load to a minimum, maybe a couple
dozen 4-5" goldfish or smaller.

the water quality wasn't bad but there's a lot of suspended
particulate in there, cleaning those two small filters might help out
more, but i'm not ready to do that. the water color is also yellow. i
belive this is due to the peat in the soil that i use for all my plants
but i'm not very worried about the color as i am about the floating
stuff which is very unsightly.

i have put together a 40g rubbermade tub filter. i have plumbed a 3/4"
intake and 2x 3/4" exhaust pipes which go into my waterfall. my
question, based on the above, is what kind of filter media should i
use? i currently only have bio-balls in there for biological
filtration. something for mechanical filtration would be good. i need
something cheap and doesn't clog easily. i don't care if it was
designed for ponds or not so long as it helps out and doesn't negativly
affect the life in the pond.

what would you guys say?

you can see tons of pictures at http://www.rserve.biz/gallery2

~Power to the Porg, Flow On!~

" wrote in
ups.com:

i previously had two canister type filters on my 2000g pond.one was
rated for 500g and the other for 250g. i thought one was rated for 750g
but 750g was it's max flow rate. these filters clogged weekly and i
could clean them in the morning and by sunset they would be very dirty
again. i don't want to clean my filters any more than a couple times a
month.

....

i have put together a 40g rubbermade tub filter. i have plumbed a 3/4"
intake and 2x 3/4" exhaust pipes which go into my waterfall. my
question, based on the above, is what kind of filter media should i
use? i currently only have bio-balls in there for biological
filtration. something for mechanical filtration would be good. i need
something cheap and doesn't clog easily. i don't care if it was
designed for ponds or not so long as it helps out and doesn't negativly
affect the life in the pond...


This season I’m trying something new for filtration, and so far it is
working well. It‘s inexpensive, the water is clear, and the fish are
healthy. I’ll describe my overall set-up, so that you can understand how
the filter works.

My system consists of 4 ponds. The top one is about 10 gallons capacity;
the water cascades from there into the second pond (about 50 gallons
capacity); from there the water cascades into the third pond (about 100
gallon capacity); and finally into the main pond (about 500 gallons).
The water is pumped from a submerged pump to the top pond. All the ponds
have water plants, mostly irises; the bottom pond has two large koi and
about 10 goldfish.

The filter system consists of a couple of flower pots - the black plastic
baskets with slits - intended for water plants. The baskets are filled
with gravel, approximately ¼" to ¾" irregular stones. The water leaving
the top pond and the water leaving the second pond discharges onto the
gravel, which extends a few inches above the water level. To exit the
baskets, the water must pass through the gravel.

I seem to have developed a low-tech, low-cost, highly effective
mechanical/biofilter. In a few months I’ll have a better picture on how
well it works.