Mower petrol tank leak!
 

My Flymo L47 Pilot petrol valve is leaking were it goes into the tank. I've
just called at the mower service shop and he says that the threads have gone
on the tank and it will cost £45.00 for a new tank.
The mower is 9 years old now so cannot justify the cost ....can I seal it up
somehow? maybe with silicon or araldite?

Mower petrol tank leak!
 

"Bill" wrote in message
...
My Flymo L47 Pilot petrol valve is leaking were it goes into the tank.
I've
just called at the mower service shop and he says that the threads have
gone
on the tank and it will cost £45.00 for a new tank.
The mower is 9 years old now so cannot justify the cost ....can I seal it
up
somehow? maybe with silicon or araldite?



try it

Mower petrol tank leak!
 

On Mon, 7 Apr 2003 17:47:05 +0000 (UTC), "Bill"
wrote:

My Flymo L47 Pilot petrol valve is leaking were it goes into the tank. I've
just called at the mower service shop and he says that the threads have gone
on the tank and it will cost £45.00 for a new tank.
The mower is 9 years old now so cannot justify the cost ....can I seal it up
somehow? maybe with silicon or araldite?

If you go with silicon, then i would use "instant gasket" from your
local auto parts shop.

regards
jim

Mower petrol tank leak!
 

Recently, Bill uttered:

My Flymo L47 Pilot petrol valve is leaking were it goes into the tank. I've
just called at the mower service shop and he says that the threads have gone
on the tank and it will cost £45.00 for a new tank.
The mower is 9 years old now so cannot justify the cost ....can I seal it up
somehow? maybe with silicon or araldite?

Get some Plumbers PTFE tape - about 50p a roll, wrap about 3 inches around
the thread and tighten with a wrench - if it seals high pressure water
pipes, it'll seal a petrol pipe !!
--
\\(º`¿´º)//
It's all on http://support.microsoft.com/ somewhere....
If you can be bothered to look for it....

Mower petrol tank leak!
 

On Mon, 7 Apr 2003 17:47:05 +0000 (UTC), "Bill"
wrote:

My Flymo L47 Pilot petrol valve is leaking were it goes into the tank. I've
just called at the mower service shop and he says that the threads have gone
on the tank and it will cost £45.00 for a new tank.
The mower is 9 years old now so cannot justify the cost ....can I seal it up
somehow? maybe with silicon or araldite?


JB Weld will sort it.. I stitched a Land Rover engine block with the
stuff!
Make sure you thoroughly degrease the parts to be fixed first

Regards,



--
Stephen Howard - Woodwind repairs & period restorations
http://www.shwoodwind.co.uk
Emails to: showard{who is at}shwoodwind{dot}co{dot}uk

Mower petrol tank leak!
 

Went for the "Araldite" and up to now no leaks.



Bill wrote in message
...
My Flymo L47 Pilot petrol valve is leaking were it goes into the tank.
I've
just called at the mower service shop and he says that the threads have
gone
on the tank and it will cost £45.00 for a new tank.
The mower is 9 years old now so cannot justify the cost ....can I seal it
up
somehow? maybe with silicon or araldite?