Paving slabs for edging raised beds.
The scaffolding plans with which I edged my raised beds some years ago are starting to break up. I'm considering replacing them with 2x2 or 2x3 (feet) concrete paving slabs ("flags", if you must). Would it be sufficient to bury half of the 2' side of a slab, or should I bury 3' slabs end on, to 2' depth, or are more solid footings required? V V ^ ^ V V | | V V | | SSSSSSSV VSSSSSS | 1' |2' or 3' V V | | V V | | VHHHHHHHHHHHHHHHHHHV _ | V V ^ | V V | | V V |1' | V V |or 2' | V V | | V V _ _ whe V = vertically buried slab. 1' (or 18") above path H = Horizontal slab on path between beds (acts as spacer) S = Soil level ion raised beds (say 6" above path) What I don't want is for the slabs to lean outwards from the paths. -- Andy Mabbett Say "NO!" to compulsory ID Cards: http://www.no2id.net/ Free Our Data: http://www.freeourdata.org.uk |
Paving slabs for edging raised beds.
and as if by magic ...........................
what kept you? Mike -- ------------------------------------------------ Royal Naval Electrical Branch Association www.rnshipmates.co.uk International Festival of the Sea 28th June - 1st July 2007 "Andy Mabbett" wrote in message ... The scaffolding plans with which I edged my raised beds some years ago are starting to break up. I'm considering replacing them with 2x2 or 2x3 (feet) concrete paving slabs ("flags", if you must). Would it be sufficient to bury half of the 2' side of a slab, or should I bury 3' slabs end on, to 2' depth, or are more solid footings required? V V ^ ^ V V | | V V | | SSSSSSSV VSSSSSS | 1' |2' or 3' V V | | V V | | VHHHHHHHHHHHHHHHHHHV _ | V V ^ | V V | | V V |1' | V V |or 2' | V V | | V V _ _ whe V = vertically buried slab. 1' (or 18") above path H = Horizontal slab on path between beds (acts as spacer) S = Soil level ion raised beds (say 6" above path) What I don't want is for the slabs to lean outwards from the paths. -- Andy Mabbett Say "NO!" to compulsory ID Cards: http://www.no2id.net/ Free Our Data: http://www.freeourdata.org.uk |
Paving slabs for edging raised beds.
On Sat, 8 Jul 2006 23:49:44 +0100, Janet Baraclough
wrote: The message from Andy Mabbett contains these words: The scaffolding plans with which I edged my raised beds some years ago are starting to break up. I'm considering replacing them with 2x2 or 2x3 (feet) concrete paving slabs ("flags", if you must). Manouevring 2 ft by 3ft slabs is seriously heavy work. I'd go for the smaller ones. Ram some bottoming down the gaps on either side to hold them firm (bottoming is a fine shale or grit used to compact drive surfaces before gravelling: once packed down tight it stays put). Janet. You could also use some of that rapid-setting concrete used for setting fence posts with, 'Postmix' or similar name. -- Chris E-mail: christopher[dot]hogg[at]virgin[dot]net |
Paving slabs for edging raised beds.
You could also use some of that rapid-setting concrete used for setting fence posts with, 'Postmix' or similar name. -- Chris He seems to have disappeared again just as fast as he appeared, and without a 'thank you' to any suggestions!!! Mike -- ------------------------------------------------ Royal Naval Electrical Branch Association www.rnshipmates.co.uk |
All times are GMT +1. The time now is 05:20 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter