Well well!
 

wrote in message
...
In article ,
Muddymike wrote:

So my original plan to just drop the submersible pump down there as
required
may not work as I doubt it will lift the water that far. I now wonder if
investing in a better pump would be worthwhile as the electricity used to
lift the water may cost more than I pay the water authority.

Anyone have any experience in the cost of running a pump at that depth?

Why not do the calculations? I assume that you know the cost of
water per cubic metre, and electricity per kilowatt-hour? Clearly
pumps won't be more than 100% efficient, but they can get close.

[ In case you are mathematically challenged, the answer is that you
can lift about 26 cubic metres of water for a kilowatt hour. ]

Thanks for that. I have just looked at the last bill (£189 for 3 months) and
they charge £1.15 for water and 1.21 for sewage per cubic metre. They arrive
at the sewage charge by calculating 95% of the incoming water volume. So if
I can pump 26 cubic metres for 18p that sound like its well worth buying a
pump.

Next job will be to open up the well and install a manhole cover. Then I
shall probably hire a pump for a weekend to see if the well can sustain the
water supply.

Mike

Well well!
 

The message
from "Muddymike" contains these words:

Next job will be to open up the well and install a manhole cover. Then I
shall probably hire a pump for a weekend to see if the well can sustain the
water supply.

You won't dry it out, but you might temporarily lower the level.

Wait until I've seen Horry...

And if your Mattishall is the one near Dereham, he's only a short trot
away from you.

--
Rusty
Growing old is mandatory; growing up is optional.
Direct reply to: horrid dot squeak snailything zetnet point co period uk

Well well!
 

"Rusty_Hinge" wrote in message
. uk...
The message
from "Muddymike" contains these words:

Next job will be to open up the well and install a manhole cover. Then I
shall probably hire a pump for a weekend to see if the well can sustain
the
water supply.

You won't dry it out, but you might temporarily lower the level.

Wait until I've seen Horry...

And if your Mattishall is the one near Dereham, he's only a short trot
away from you.


My Mattishall is indeed the one near Dereham but I don't live there anymore.
I am now in North Yorkshire but have regular contact with the Dereham area.
Any help with the pump appreciated.

Mike

Well well!
 

The message
from "Muddymike" contains these words:

My Mattishall is indeed the one near Dereham but I don't live there
anymore.
I am now in North Yorkshire but have regular contact with the Dereham area.
Any help with the pump appreciated.

Right-ho. Horry did have the wellhead gear a few months ago, and he's
like me - never throws anything away. Bought a sidecar and chassis from
him a while back. "I think I've got one of those - last time I saw it,
it was on top of the shed. But that was some years ago..."

Sure enough, there it was.

Panks in Norwich is somewhere where you'd get pipe, rods and a pump - if
you can't get it locally. (Oo-er!)

--
Rusty
Growing old is mandatory; growing up is optional.
Direct reply to: horrid dot squeak snailything zetnet point co period uk

Well well!
 

On Mar 11, 3:30 pm, "Muddymike" wrote:
wrote in message

...



In article ,
Muddymike wrote:

So my original plan to just drop the submersible pump down there as
required
may not work as I doubt it will lift the water that far. I now wonder if
investing in a better pump would be worthwhile as the electricity used to
lift the water may cost more than I pay the water authority.

Anyone have any experience in the cost of running a pump at that depth?

Why not do the calculations? I assume that you know the cost of
water per cubic metre, and electricity per kilowatt-hour? Clearly
pumps won't be more than 100% efficient, but they can get close.

[ In case you are mathematically challenged, the answer is that you
can lift about 26 cubic metres of water for a kilowatt hour. ]

Thanks for that. I have just looked at the last bill (£189 for 3 months) and
they charge £1.15 for water and 1.21 for sewage per cubic metre. They arrive
at the sewage charge by calculating 95% of the incoming water volume. So if
I can pump 26 cubic metres for 18p that sound like its well worth buying a
pump.

Next job will be to open up the well and install a manhole cover. Then I
shall probably hire a pump for a weekend to see if the well can sustain the
water supply.

Mike

If you fit a meter to your outside tap, you should be able to show
that you return less than 95% to the sewer.
I returned 56% last year. I have a small veg garden and two garden
ponds. Unfortunately despite much arguing I had to pay for the meter
myself.
What other organization could insist that you have to supply your own
measuring device or accept their own gross overestimation.
This could only happen in rip off Britain.
Tony Bull
www.caterpillarfountain.co.uk