Advice on using leaf mold and grass clippings
 

Am trying to get into shape a garden containing some quite hard (but
seemingly good) top soil, but it has quite a lot of lumps of clay in it
(dug up from the clay bed from about a foot below) some time in the past.

I have some ready access to a endless supply of rotted leaf mold heaped
up from somewhere nearby and similarly a lot of old lawn grass cuttings.

With the intention of growing just flowers and shrubs (no veggies) in
the garden, should i try to remove all the lumps of clay ( a lot of them
are only a couple of cm across) ?

Also what quantities/ratios of mold and or grass cuttings should i mix
in, if you even think this is an advisable thing to do.

Many thanks for any advice.

Advice on using leaf mold and grass clippings
 

In article ,
john west wrote:
Am trying to get into shape a garden containing some quite hard (but
seemingly good) top soil, but it has quite a lot of lumps of clay in it
(dug up from the clay bed from about a foot below) some time in the past.

I have some ready access to a endless supply of rotted leaf mold heaped
up from somewhere nearby and similarly a lot of old lawn grass cuttings.

With the intention of growing just flowers and shrubs (no veggies) in
the garden, should i try to remove all the lumps of clay ( a lot of them
are only a couple of cm across) ?

No. Break them up, if you have the energy, but clay holds nutrients
and soils without it are rarely fertile.

Also what quantities/ratios of mold and or grass cuttings should i mix
in, if you even think this is an advisable thing to do.

As much as you have the energy for :-)


Regards,
Nick Maclaren.

Advice on using leaf mold and grass clippings
 

john west wrote:

Am trying to get into shape a garden containing some quite hard (but
seemingly good) top soil, but it has quite a lot of lumps of clay in it
(dug up from the clay bed from about a foot below) some time in the past.

I have some ready access to a endless supply of rotted leaf mold heaped
up from somewhere nearby and similarly a lot of old lawn grass cuttings.

With the intention of growing just flowers and shrubs (no veggies) in
the garden, should i try to remove all the lumps of clay ( a lot of them
are only a couple of cm across) ?

Whilst you are at it, gypsum is recommended as a soil improver
where clay is present, but appears to be sold in garden centres
as a proprietary product costing over £6 for 2.5 kg.

http://www.capitalgardens.co.uk/clay...er-p-6321.html

On the other hand, I picked up a 25 kg bag of multi-finish
plaster for under £5, and AFAIK this is essentially the same
material. It worked very well.

Chris
--
Chris J Dixon Nottingham UK


Plant amazing Acers.

Advice on using leaf mold and grass clippings
 

Chris Hogg wrote:

On Tue, 26 May 2015 16:02:15 +0100, Chris J Dixon
wrote:

On the other hand, I picked up a 25 kg bag of multi-finish
plaster for under £5, and AFAIK this is essentially the same
material. It worked very well.

Just be aware that builders plaster is not the same as it used to be
many years ago, when it was derived from mined gypsum. These days most
of it is the by-product of flue gas desulphurisation at big coal-fired
power stations, where the flue gases are scrubbed with lime. As the
lime is use up, the efficiency of the scrubbing process drops away,
and the spent lime, now mostly gypsum, is sold off for building use.
But it still contains a little residual lime, so whereas in the past,
gypsum could be used around lime-hating ericaceous plants such as
rhododendrons, camellias and heathers to improve and even acidify the
soil (pure gypsum being mildly acidic), it would not be a good idea
these days.

Still OK as a 'clay-breaker' though.

I take your point. As it happens, I live in an area that features
both methods of production, and have even seen it being mined.
However, which one makes it into the local shops is anybody's
guess.

Chris
--
Chris J Dixon Nottingham UK


Plant amazing Acers.

Advice on using leaf mold and grass clippings
 

On 26/05/2015 16:02, Chris J Dixon wrote:
john west wrote:

Am trying to get into shape a garden containing some quite hard (but
seemingly good) top soil, but it has quite a lot of lumps of clay in it
(dug up from the clay bed from about a foot below) some time in the past.

I have some ready access to a endless supply of rotted leaf mold heaped
up from somewhere nearby and similarly a lot of old lawn grass cuttings.

With the intention of growing just flowers and shrubs (no veggies) in
the garden, should i try to remove all the lumps of clay ( a lot of them
are only a couple of cm across) ?

Whilst you are at it, gypsum is recommended as a soil improver
where clay is present, but appears to be sold in garden centres
as a proprietary product costing over £6 for 2.5 kg.

http://www.capitalgardens.co.uk/clay...er-p-6321.html

On the other hand, I picked up a 25 kg bag of multi-finish
plaster for under £5, and AFAIK this is essentially the same
material. It worked very well.

Chris


I don't think gypsum sets when mixed with water, but probably not
important in the long term

Advice on using leaf mold and grass clippings
 

On 26/05/2015 19:46, Chris Hogg wrote:
On Tue, 26 May 2015 18:32:52 +0100, stuart noble
wrote:

On 26/05/2015 16:02, Chris J Dixon wrote:
john west wrote:

Am trying to get into shape a garden containing some quite hard (but
seemingly good) top soil, but it has quite a lot of lumps of clay in it
(dug up from the clay bed from about a foot below) some time in the past.

I have some ready access to a endless supply of rotted leaf mold heaped
up from somewhere nearby and similarly a lot of old lawn grass cuttings.

With the intention of growing just flowers and shrubs (no veggies) in
the garden, should i try to remove all the lumps of clay ( a lot of them
are only a couple of cm across) ?

Whilst you are at it, gypsum is recommended as a soil improver
where clay is present, but appears to be sold in garden centres
as a proprietary product costing over £6 for 2.5 kg.

http://www.capitalgardens.co.uk/clay...er-p-6321.html

On the other hand, I picked up a 25 kg bag of multi-finish
plaster for under £5, and AFAIK this is essentially the same
material. It worked very well.

Chris


I don't think gypsum sets when mixed with water, but probably not
important in the long term

The setting action of plaster has nothing to do with it's action as a
clay-breaker. It's the calcium that does it, gypsum and plaster being
slightly soluble (~0.2% in water, IIRC). The calcium causes the
microscopic flat platy clay particles to clump together (flocculate)
in a more open structure (often described as an edge-to-face
house-of-cards structure, compared to the face-to-face pack-of-cards
structure it was before) which makes the bulk clay easier to manage.

Lime can be used to achieve the same result, but with an accompanying
increase in pH which may not be desirable.


Ah, interesting!