Howto build your own water feature
 

All,

Has anyone tried to make one off these :

http://www.oak-barrel.com/stainless_...lver_tower.htm

or does anyone know a book / website that shows you how to make one.

Steve

"Steve Drake" wrote in message
...
All,

Has anyone tried to make one off these :

http://www.oak-barrel.com/stainless_...lver_tower.htm

or does anyone know a book / website that shows you how to make one.

Steve

You want one of those in yore garden?

Yes.

They don't suite all gardens, but one would look nice on our patio

and.... the wife agrees!!!!



"Steve" wrote in message
...

"Steve Drake" wrote in message
...
All,

Has anyone tried to make one off these :

http://www.oak-barrel.com/stainless_...lver_tower.htm

or does anyone know a book / website that shows you how to make one.

Steve

You want one of those in yore garden?

"Steve Drake" wrote in message
...
"Steve" wrote in message
...

"Steve Drake" wrote in message
...
All,

Has anyone tried to make one off these :


http://www.oak-barrel.com/stainless_...lver_tower.htm

or does anyone know a book / website that shows you how to make one.

Steve

You want one of those in yore garden?


Yes.

They don't suite all gardens, but one would look nice on our patio

and.... the wife agrees!!!!




There's an absolutely enormous steel waterfall like that in Sunderland in
the Winter Gardens - must be 30 or more feet high, and it looks great.

Duncan

"Steve Drake" wrote in message
...
All,

Has anyone tried to make one off these :

http://www.oak-barrel.com/stainless_...lver_tower.htm

or does anyone know a book / website that shows you how to make one.

Steve

WOW - I want one too :~))

Should not be too difficult to make (or get made)
-You'd need to weld a stainless steel 'box' and a 'tower'
-It would have a partition about an inch or so below the top of the 'tower'
-Run a hosepipe up through a hole the partition
-Put a nice stainless steel mesh across the top
-Place the 'tower' in the 'box'
-Switch on the water (via a pump) and the partition at the top will fill up and
overflow........you might need to figure out a way of having in just come down
the front, or place the whole thing up against a wall.........

Jenny

"Martin" wrote in message
...
On Sun, 19 Jun 2005 12:13:32 +0200, "JennyC"
wrote:


"Steve Drake" wrote in message
...
All,

Has anyone tried to make one off these :

http://www.oak-barrel.com/stainless_...lver_tower.htm

or does anyone know a book / website that shows you how to make one.

Steve

WOW - I want one too :~))

It has the look of a urinal. ;-(


Should not be too difficult to make (or get made)
-You'd need to weld a stainless steel 'box' and a 'tower'
-It would have a partition about an inch or so below the top of the 'tower'
-Run a hosepipe up through a hole the partition
-Put a nice stainless steel mesh across the top
-Place the 'tower' in the 'box'
-Switch on the water (via a pump) and the partition at the top will fill up
and
overflow........you might need to figure out a way of having in just come
down
the front, or place the whole thing up against a wall.........

You could get GOBA in Leiden to do the welding, Jenny.
Martin

I can weld myself thank you Martin :~))
Jenny