Spider wrote:
On 22/03/2014 17:41, Lobster wrote:
I've got an old cherry tree stump which I really want rid of. It's
probably about 10" high by 15" across, and the problem is that it's in an
awkward position at the foot of a banked area, and surrounded by paving
stones, so would be very disruptive and difficult to dig out. It's
inaccessible to a tree stump grinder (other than maybe something hand-
held).

Burning it out seems the way forward, and I've tried several times (over
years), burying the thing in burning coal. Trouble is the stump doesn't
really burn much as such; it just chars over, and has got quite dished on
top, but there's a lot more to go. Anyway, it occurred to me that
maybe I
could try again this summer but first impregnate the remaining timber
over
a period of time (maybe honeycombing it with a drill first) to
encourage it
to burn properly. Anyone tried this? What would be good to use, that
wouldn't just evaporate off?

I'm not after getting the whole thing out - if I just get the stump below
ground level and cover it with a plant tub or something, that would be
fine!

Or any other constructive ideas!?




I'm not sure I understand why you can't just saw it off at ground level.
You could then put a paving slab on it (to create a form of shallow
plinth) and add the plant tub you mention.

You could stretch this idea to drilling holes in the flush stump and
pouring SBK in them before placing the slab plinth. That way it will
rot away out of site and be safe for passing animals and children.


SBK
SBK Superbike (racing motorbikes)
SBK Svenska Brukshundklubben
SBK Snowboard Kids (gaming)
SBK Stichting Bouwkwaliteit (Dutch)
SBK Short Bus Kids
SBK South Brooklyn Railway Company
SBK Single Below Knee (amputation)