View Single Post
  #7   Report Post  
Old 09-10-2003, 07:14 PM
Bill Freeman
 
Posts: n/a
Default Preparation and storage - small engine for long periods

Not knowing where you're located but if in a cold area change your
oil to 5w-30 synthetic (e.g. Mobil 1) which won't turn to the consistency of
grease in the cold. Fuel stabilizers? Just be sure that your gasoline
funnel has a strainer in it. Once a year .. . drain the gasoline out and
use it (e.g. for your auto, lawnmower, Ryobi etc.) and refill. Fuel de-icer
will bind up any free water vapor from seasonal weather change. Fuel isn't
that much of a problem with existing gasolines. In the era of "leaded" fuel
it was. Enjoy!


"John B." wrote in message
...
I've searched for other newsgroups surrounding care small engines, and

this
was the only area that I was able to find that discusses a few small

engine
issues. If there is another newsgroup area for this type of question, I

will
gladly post it there.

I have a small gasoline engine generator that I use for electricity during
outage emergencies. I've read various suggestions towards storing it for
long periods of time. A couple of items seem to make sense like:

1. Adding a good fuel stabilizer to the gasoline.
2. Removing the spark plugs, spraying a little WD-40 inside the cylinders,
and then place the spark plugs back in after each use.
3. Running the generator for a short period of time every few months.

My question concerns more towards the carburetor:

1. How can I reduce the amount of problems associated with the carburetor,
such as gum and resin build-up, diaphragms and gasket dry rotting? I've

only
heard that I should run out the gas going to the carb (but keep the gas

tank
full), and that I should spray a little WD-40 into the carb. Yes, no, or
other suggestions?

2. Is there any other suggestions that I should do or think about

regarding
the long term storage of the engine or generator?

Thanks.
John

--
Change [comcast.non] to [comcast.net]