On Tue, 30 Dec 2003 06:52:11 -0500
John Bachman wrote:

On 29 Dec 2003 12:42:15 -0800, (Han Chung)
wrote:

John Bachman wrote in message
... I would put 2 -
3 inches of sand minimum to make sure that the liner never contacts
the sandstone. However, if you use the protective material that I
described above you can just line the whole thing with it. That is
what I did and I put two layers to make sure.

How would I go about lining the steep edges with sand?

I do not know a way to do that. That is one reason why I used the
liner protector material. It worked really well. I put it under my
stream from my waterfall also. That way I can put large rocks in the
stream with no danger of punching through the EPDM.

John

A method of lining the steep sides with 'sand' is to mix the sand with a
goodly portion of mason's lime. This will make a good sticky mixture
that can be painted or troweled onto the (moistened) sides. I did this
for my backyard pond somewhere around eight years ago. I last year had
a disaster in that pond and had to rebuild it. The under liner
sand/lime mix was pristine, clean, and almost concrete-like except that
it was quite a bit softer.
When mixing just make sure that the mix will stand out horizontally from
a trowel about 2 inches. It's very easy to work with, but definitely
use gloves as the lime is caustic.

Cybe R. Wizard
--
Unofficial "Wizard of Odds," A.H.P.
Original PORG "Water Wizard," R.P.
"Wize(ned) Wizard," A.P.F-P-Y.
Barely Tolerated Wizard, A.J.L & A.A.L