parasene parafin heaters
Troy wrote in message ...
stuart_tawn3 wrote:
I am having problems with my mothers parasene heaters. Basicly the
wicks are difficult or impossible to wind up and down. I have tried
trimming the widths of the wicks and fitting brand new wicks but
nothing seems to fix the problem.
Does anyone have any tips or suggestions as to a way to get over these
problems.
Any help would be much appreciated.
Which model?
I had a similar problem with the parasene "Super Warm 10".
Unfortunately I do not know the model numbers, but they both have a
round tank about 125mm high and 300mm in diameter. One heater has two
vertical heater eliments and a cross convector between the two and the
other has one vertical eliment with a up side down half round
convector on the top that pivots. None of the heaters have any brass
fittings on them.
I dont know why all of a sudden this has started to happen. The wicks
from what I can see are not of a dense enough material and the turning
cogs on the heater are not getting a grip. Are there some alternative
25mm approx wicks available?
Cheers stuart
|