Unfortunately, putting the wheel under the load in the case of a
wheelbarrow
creates more problems than it solves. The load then becomes that much
higher, meaning you have to shovel your contents higher, unless a very
small
wheel is used, in which case it tends to bog in on wet ground.

Also, it puts the C of G much higher, which results in a tendency to
topple
over sideways, and the pusher is forced to try to counteract it, which
puts
much strain on the arms.

The design of the wheelbarrow is obviously not perfect, but it is one of
those things which has evolved as far as is practical. Various
improvements
have been tried, but AFAIK none have seriously improved the breed. I
believe
it has reached the optimum compromise. I wish the OP every success in
his/her endeavours, but I think the wheelbarrow "as is" is going to be the
norm for the foreseeable future.





So what you are saying is, that I 'haven't' redesigned the wheel . . . . .
.. .
..
..
..
..
..
..
..
..
..
barrow ;-) ?

Mike

--
H.M.S.Loch Fada Association Reunion Scarborough April 2nd - 5th
H.M.S.Newfoundland Association Reunion Hayling Island April 23rd - 26th
Royal Naval Reunion Eastbourne May 7th - 10th
H.M.S.Collingwood Association Reunion Bracklesham Bay May 21st - 24th