Drew Cutter wrote:
I wish the upright diagram of DIY bead filter would of label the bottom
left outlet (the one the sealed) . Its functions ?
WOOPS!! forgot this
http://www.koi.com.my/ubbimages/ppdia.jpg
The above diagram shows the working principle of bead filter.
1. For normal filter operation, turn valve F to on position. Close all
other valves. For bead filter, water enters through the bottom and come
out from top of drum.
Please note this
( Top Photo shows the version water enter from the top and discharge at
the bottom. )
2. To backwash turn valve B to on position, off all other valves.
Duration 2 to 3 mins
3. To rinse turn valve F near inlet and valve R to on, turn all other
valves off. (Duration 30 seconds)
It seems that either version will work, just that the photo version
requires more complicated valve combinations.
Chagoi