Sorry, got pictures of about everything else but filter system. If you
would like, I will try to take some and post them. The bottom drain is a
vertical piece of 4 inch pipe, going down into a deep spot in the pond. It
flows into the vortex filter with all 4 inch pipe. The outflow from the
vortex steps down to 2 inch pipe going into the shed. In a hole in the
floor of the shed, below pond water level is a "T" going to 2 sequence
pumps, one feeding a BBF-2 bubblebead filter, and the other feeding a 6
cubic foot bead filter. Each has its own return to the other end of the
pond. One return currently feeds a trickle tower, the other an upflow
gravel filter. The trickle tower and upflow gravel filter are scheduled for
replacement this year. Do to total length from one end of pond to back of
shed, it would take multiple pictures.
--
RichToyBox
http://www.geocities.com/richtoybox/pondintro.html
"pmwebdesigns" wrote in message
...
You don't have any pics of your pump and filter set up do you?
Priss
"RichToyBox" wrote in message
news:Trdoc.73568$0H1.6717086@attbi_s54...
If you do your plumbing with 4 inch pipe, there should be very little
difference in the elevation within each of the drums and they will not
go
dry. If the pipe size is small, then you run the risk of having the
pump
run dry. I have an external pump feeding from a bottom drain and vortex
filter and do not find that I have a problem.
--
RichToyBox
http://www.geocities.com/richtoybox/pondintro.html
"pmwebdesigns" wrote in message
...

Okay, you guys that have external pumps and uses 55 gal drums are
going
to
have to help me here. My pump is suppose to push 1500 - 5400 G.P.H.
If I have the pump pulling from the 55gal drum to push water flow in
the
pond, I was thinking if it max's 5400 how can I get the water to flow
into
the drums being gravity fed fast enough without the drum going dry.
I'm
go
have 3 drums. One the settlement, one with loads of filter mat and the
other
empty with a hair of filtermedia and this one will be the one the pipe
from
pump pulls from. Also the pipe going to the pond I was going to have a
venturi thingie set up. Did I explain that? I am so tired.
Priss