I'd go about 6-8" deep with a 1/2" or larger bit (preferably auger)
using an electric drill.
Then I fill the holes with diesel and give it about 15 minutes to
saturate the stump. Repeat once more than lite it.
After a few days there won't be a stump.
Don't do it if the surrounding area is "at risk" of also catching on
fire.
Another method is to cover the stump with charcoal and lite it. The
charcoal will burn out the stump.
) wrote in message . com...
The idea is to drill holes and fill with a chemical to break down the
stumps.
Would a manual bit brace do the trick, or would you use a
battery-powered hand drill. What size? Length of bit, etc.? Thanks