View Single Post
  #114   Report Post  
Old 09-06-2004, 04:07 PM
The Watcher
 
Posts: n/a
Default For Drilling Holes In Tree Stumps

On Sun, 06 Jun 2004 21:25:56 -0000, (Bill Oliver) wrote:

In article ,
The Watcher wrote:
On Sun, 06 Jun 2004 12:01:37 -0000,
(Bill Oliver) wrote:


If you think ANY stump is watertight you might want to try drilling into a few
of them. I wouldn't bet on any stump containing anything completely. Yes, you
would be pumping it into the stump, but it will be escaping from the stump into
the ground. Stumps interact with the soil around them. That's their purpose. If
they were liquid-tight they wouldn't do much good for the trees, would they?


There is a difference between "pumping diesel into the ground" and saying
that there *might* be some diesel that is incompletely burned that escapes
into the ground.


Yes, since it's a safe bet that if you pump some diesel into a stump, some WILL
get into the ground around that stump.

So, let's say I pump 1/2 liter of diesel into a into a 1 meter high 2 meter diameter
stump. I then burn that stump to the ground. How much of that 1/2 liter do you
actually claim will be (a) unburnt and (b) in the ground?


Unknown, but I'd be willing to bet that SOME would. Since one of the reasons I
moved into the country was to live out here, I'd prefer not to pump any diesel
into the ground if I have a choice in the matter. If that means a little more
work with a pick and pry bar, I'll do the extra work.