Xref: kermit rec.ponds:153195

I have the bioforce 2000w/uv w/a 1500gph submersible giant pump I does fine.
The bioforce is pretty easy to clean. It would work better if there was a
settle tank before the filter. The pads in the filter grab alot og gunk.
"Heather" wrote in message
...
Hi All:

DH went home last night to a split filter pouring water everywhere.
(Rubbermaid garbage can - pretty thin) Not fully understanding things
like
veggie filters he did his best to rectify the situation.

First he turned off the pump - very good.

Next - bacause the water level was down a six or eight inches he plopped
the
garden hose (no chlorine - well water) into the veggie filter that he just
thought was a little pond, and turned on the hose full.

I now have no filtration and a whole lot of goop from the WH roots in the
pond.

So how serious is all this goop in the pond with no filtration? If I make
the Skippy filter that will take a day or two and I don't know if I have
that much time. I did put a 500gph pump on a shelf with a hose out of the
water to add aeration.

Should I continue with making a new filter or rush to the nearest pond
store
and buy a filter?

Pond is 1800 gal.
6' rise to filter, gravity to veggie filter, down stream to pond.
Pump is Laguna 7000 with estimated 1500 gph at 6' rise.

Looking at Cyprio 2000 Bioforce filter - pump size 1450 or the OASE
Biotec
5 - pump size 1450. I'm a little concerned that my pump may push the
water
thru' just a little fast for either of these filters.

Comments please!

Heather
SW Ontario