I tried something on a mica pot a few days ago, thinking of
getting
trees ready for the wedding (horrors--one or two will be in
mica
pots!). I sanded the pot with 150 grit sandpaper, then 300,
making sure
to sand with the length of the pot in mind so there wouldn't be
any
wayward scratches. I didn't really bear down, just sanded
enough to
even out the surface. I then tried rubbing on mineral oil,
which I use
on unglazed ceramic pots for displays. The mineral oil
evaporated
fairly quickly, so I tried vegetable oil instead. Works great.
The
sanding evens out the marks from the molds and gives the pot
more of a
matte surface as opposed to one that is rather glossy. The
oiling gives
it a nice low lustre. Has anyone else tried this?
Sounds like a good idea, but most of my mica pots have squirrel
tooth on their rims by the end of their first year of use. It
would take more than a "light" sanding to get rid of them.
Jim Lewis -
- Tallahassee, FL - Only where
people have learned to appreciate and cherish the landscape and
its living cover will they treat it with the care and respect it
should have - Paul Bigelow Sears.
************************************************** ******************************
++++Sponsored, in part, by Chris Cochrane++++
************************************************** ******************************
-- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ --
+++++ Questions? Help? e-mail +++++