On Tue, 24 Aug 2004 15:42:04 -0400, "how"
wrote:

"Mike" wrote in message
. com...
I have a small preformed pond that has split. I sealed it with
silicone but the leak is back and the split a little larger. Is there
an easy way to seal the tear?


Hi,
To stop it from getting larger, drill a small hole at both ends of the
split. Patch it with liner tape or I've heard that a hot melt gun can fix
them.

I have had good luck with "Goop" adhesives for this. There are several
varieties; perhaps the "Plumbers Goop" would work best. You could try
adding reinforcing tape, too. It needs to be dry, however.
PVC can be welded with a hot air gun, so if you know someone with one
this could be done, too.
--
Crashj
--
Crashj