View Single Post
  #3   Report Post  
Old 14-04-2005, 06:13 AM
World Traveler
 
Posts: n/a
Default

The large size blocks are difficult to keep completely level if you've got a
lot of them creating a patio or a solid walkway. Especially for steps on a
slope, I built frames for the blocks.

Because of our sandy soil in FL, I used PT 2 x 6s to make a frame just big
enough for 4-6 of these large blocks, then anchored the frame into the
ground with 2' rebar. Then I tamped some sand into the frames and put the
blocks on top of them. This is especially effective in making steps because
you can level everything make sure your spacing is correct. It looks good,
everything is level and the steps are easy to lay out.

"RicodJour" wrote in message
oups.com...
wrote:
My apology for cross posting.

I have a question regarding laying some concrete pavers to make a

trail
at the side of my house. I am talking about those 24" X 24" type you
see in big box stores.

Every book I read one needs to put a few inches of gravels plus one
inch of sand for foundation. When my neighbour did his two years back
he did not put down any foundation at all. In fact he did not even
remove the sod ! Two years later every still looks fine to me. In

fact
it has a certain rustic look to it that is not available in jobs done
properly !

What disasters I am looking at if I follow his lazy way ?


Probably none. You are essentially installing stepping stones, right?
If you're laying the smaller pavers, more brick sized, then the base is
more critical in keeping the pavers from shifting around. Since you
like the more rustic look, and the pavers are so large, don't sweat it.
I wouldn't just drop them on the sod, though. It'll look much better
right away, and you won't have problems with tripping and mowers and
such, if you remove the sod and lay the paver flush.

R