On Sat, 23 Apr 2005 22:26:34 -0500, (DD DDD) wrote:

Can I put activated Charcoal in my canister? Will it do any good? Or
should I just leave it alone? Im just trying to keep the water as pure
as I can. My filter is 12 inches wide and 24 inches high. It has room
for a charcoal area. Also I have a course, medium and fine filter with
40 bio ball on bottom, Can I put A fine filter on top instaed or the
course one so I only have to clean the top one and not disturb the
others. I want to keep the good bacteria alone that way. Thank you

As long as the carbon is easy to remove it is okay. You don't want to leave
old carbon as supposedly it will drop some bad stuff in favor of other bad
stuff, once full. (Hope that makes sense.) I prefer carbon matting myself,
I mostly use it to remove tannins when I have a problem.

Regarding your filter, are you saying the water goes thru in the direction
of coarse, medium to fine, or the other way around? Assuming the later,
coarse, medium to fine, the reasoning is to have the first two catch any
large muck to keep the fine, where a lot of bio-media will be, clean. If
you put a fine at the beginning, it will clog up quickly and fine is harder
to clean. That all said, try it and see what you think, because
YMMV. ~ jan


See my ponds and filter design:
www.jjspond.us

~Keep 'em Wet!~
Tri-Cities WA Zone 7a
To e-mail see website