Himanshu wrote:
I'm in the north-east US with a grass mix of Bluegrass/Fescue/Ryegrass,
although right now it includes weeds and another kind of light-green,
wider-blade grass which has taken over major parts of the lawn.

Anyway, my question is about mulching - I usually wait atleast 2 days
after rain to mow, and I usually mow late afternoon/early evening, and I'm
mowing high, once a week.

My lawn mower or riding mower get clogged up with the mulched grass
clippings. So much so that sometimes I have to stop and clear the blades
of clumps. These then end up on the lawn and cover parts of the lawn,
which left alone would probably kill the grass under that spot.

So what I'm doing is running the rake through these clumps after mowing,
but I'm thinking either I'm not doing something right, or there has to be
a better way of dealing with this...suggestions?


Overlap your cuts. The bigger your bite (like the first full bite that
overlaps nothing), the slower the speed.

Make sure your blade(s) is(are) sharp. If your mower wasn't built as a
"mulching mower", you may need a special blade(s), so make sure you have the
right one.

Mow often enough that you're not taking more than 1/3 the blade at a time.
Considering a target of 2-1/4" after mowing, that means you need to be
mowing before the grass reaches 3-3/4". Going from 3" to 2-1/4" would be
better. In spring, this could mean mowing more than once a week. And the
closer you're getting to the maximum height, the more overlapping your cuts
need to be.

--
Warren H.

==========
Disclaimer: My views reflect those of myself, and not my
employer, my friends, nor (as she often tells me) my wife.
Any resemblance to the views of anybody living or dead is
coincidental. No animals were hurt in the writing of this
response -- unless you count my dog who desperately wants
to go outside now.
Have an outdoor project? Get a Black & Decker power tool::
http://www.holzemville.com/mall/blackanddecker/