William wrote:
On Sun, 07 Aug 2005 02:30:20 GMT, USENET NEWSREADER
wrote:


I am building a shed in my backyard and want to build it to code, and I
need to have some tie downs for it at each corner.

I could use some mobile home straps that get sunk into the ground, but I
sort of prefer to use something like Simpson Strong tie down threaded
bolts dirrectly into the concrete pad and then up through some concrete
block and them bolt down the sill plates to the rods, but no one in
Raleigh NC seems to know about them.

DOes anyone know if you can use regular threaded rods available in
hardware stores for the same purpose?

I was also thinking that I could use some kind of steel or iron pipe -
3/4 or 1" size - down through the block, but that is kinda complicated
to do.

ANy suggestions on where I can buy this stuff around Raleigh, NC? Reply
to the newsgroup - thanks!



Well, what building materials are you using?

J-bolts would work if you haven't poured the slab already.

Then there are RedHeads. A bolt and anchor system. Nice and strong,
seen them used in metalbuilding construction.
You use a hammer-drill and make the appropriate size hole into the
slab. Then you drop in aan epoxy-filled glass tube, then the anchor
bolt. You smack the anchor bolt with a hammer, breaking the epoxy
tube. Twenty four hour cure.

Come back next day, lay sill plates and go....

I have to build the shed on concrete footers, and due to sloping land, I
want to use the long bolts (not just the j-bolts) attached to the re-bar
in the footer - but it has to run through 1 to 3 7 inch thick concrete
blocks, so the rods need to be taller than the average j-bolts.

Any idea where I can find the threaded rods and the stainless fastners
in Raleigh? HD and Lowes doesn't have them.