John Deere LT155 uneven cut on slight slope- solution?
OK, Bought a used LT155 for a decent deal. The tractor has a floating
deck. The deck connects in the front at a single point and the height
adjust is a dual point at the back of the deck.
The problem is that the front guide wheels are set on the lowest
setting, but don't touch much while mowing. When on a slight slope the
low side seems to dig in and cause an uneven cut. This also happens if
I take a tight turn.
I made sure the tires have equal air, deck is level on pavement when in
the down position, and everything else I can think of. I'm almost to
the point of adding adjustable pivot wheels to the front deck to keep
the deck level while mowing.
Anyone else have a solution? Not happy going from a very nice push
mowed lawn to a hacky looking cut from a rider.
Kirb
|