Quote:
|
Originally Posted by The Rat Hehehe
Idle Problem Honda Mower Buffalo HRU196 GXV160 OHV
Hi folks
I have a Honda mower with a GXV160 OHV 5.5 Hp engine that will not idle. It
appears to run ok at full revs, but when I bring it back to idle the motor
slows them speed up again over and over at if the engine is running to slow
and the governor is compensating for the low revs.
The governor spring and lever are connected at the top of the governor lever
to the carby and the lower spring on the governor lever is still connected
to another lever attached to the throttle cable.
This problem started after I removed the blade disk to replace the blades.
Any ideas or is it a trip to the dealer
|
Start the engine up and slow it down until it goes to hunting. Then take your finger and slowly apply the choke, If it smoothes out there is some trash or something in the idle circuit in the carb. , To fix remove the carb. tear it down and clean with carb. choke spray cleaner and reassemble.